Fixes https://github.com/ggml-org/llama.cpp/issues/31680
The matmul_tiled() implementation in tinyBLAS_Q0_PPC requires nc to be a multiple of 8 to perform matrix multiplication correctly.
The previous alignment logic contained a special case for n == 4, which allowed n_aligned to be 4. Consequently, the tiled path could be selected with nc = 4, violating the kernel's tile-width requirement.
This caused incorrect matrix multiplication results, observed as garbled inference output when running Flint Q4_K_M and Gemma 3 27B Instruct.
The fused lightning indexer is always used now, so drop the cparams flags, the auto probe and the non-fused fallbacks.
Assisted-by: dsh:llama.cpp/ggml-org/DeepSeek-V4.1-Flash-1017-GGUF (Mac Studio, M5 Ultra, 256GB)
* Conversion
* Separate model_type
* Add gate_rank to allow building from metadata while testing
* Base model
* Loop graph
* Support the new is_varloop attribute
* Adopt naming scheme from https://github.com/ggml-org/llama.cpp/pull/32588
* Rename to varying
* hip: add RDNA1 MMVQ parameter table (1 warp per block for ncols=1)
* hip: write the RDNA1 MMVQ values explicitly instead of recursing into the generic table
* hip: list the RDNA1 MMVQ table before RDNA2 in the enum
* Update ggml/src/ggml-cuda/mmvq.cu
---------
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
* ci : run the OpenVINO GPU job only for OpenVINO changes
The self-hosted OpenVINO GPU job ran for most PRs and every master push
on a shared runner, so it queued for hours.
- ci-self-hosted-openvino.yml (GPU): runs only for changes to
ggml/src/ggml-openvino.
- build-openvino.yml: keeps its triggers (OpenVINO changes on PRs, every
source change pushed to master). The Linux job runs on a GitHub-hosted
runner and tests the OpenVINO CPU device only.
* address review comments
* ci : limit the OpenVINO PR CMake trigger to ggml
* ci : drop the OpenVINO Ubuntu job
* ci : trigger OpenVINO PR runs on tests/CMakeLists.txt
* convert: qwen3-asr: put "language ..." output into thinking block
* convert: qwen3-asr: read the chat template from models/templates
The converter embedded its own copy of Qwen3-ASR.jinja. Read the
bundled file instead, as the Kimi-K3 and Kokoro converters do, so
the GGUF and test-chat share a single template.
---------
Co-authored-by: Pascal <admin@serveurperso.com>
Llama Chat compiles @ggml-org/llama-voice from ui/lib/voice/src, but the
CMake stage and the Docker UI stages copied only ui/lib/ui, so their npm
build could not resolve the voice imports. Stage ui/lib/voice/src next to
Llama UI and track it as an input of the CMake build.
Assisted-by: Claude (Opus 5.5 Medium)
* mtmd: drama3 voice cloning
The Fish S2 codec encoder (fish_s2_spkenc) now also serves drama3:
- conversion: drama3 writes the codec encoder and the audio encoder KV, shared with fish_s2
- fish_s2_spkenc: outputs the codes of the clip (gen-side reference) and, in a drama3_gen mmproj,
builds the drama3 backbone rows (E_lm[semantic] + E_cb[1][code 1]) / sqrt(2)
- drama3_gen tower: teacher forcing when the caller gives the codes of the next frame
- drama3 pipeline: reference-bracket-v1 prompt with one reference (vLLM-Omni fish_omni), the
reference frames go through the backbone as codec rows and through the tower with their codes
- mtmd_gen_state_get_ref_codes(): read-only access to the reference codes of a gen state
Claude-Session: https://claude.ai/code/session_01PpX3DmaxNSmJbxGaxnUBrX
* fix correctness
* clean up
* rm redundant code
* fish_s2: rm unused import
---------
Co-authored-by: Xuan Son Nguyen <son@huggingface.co>
* ui: add a voice engine for capture, peaks and transcription
Voice input needs a live waveform, a clip that can be sent and drawn,
and a transcript, whether the model streams text while the user speaks
or not. This adds the engine for it in src/lib/voice, with no imports
of app stores or components, so it can move into a package later.
- VoiceCapture: one microphone start gives live levels (RMS on a dB
curve, fixed history, newest last), PCM16 mono chunks at 16 kHz from
an inline AudioWorklet (ScriptProcessor fallback), and on stop a
16-bit mono WAV clip with its duration and peaks. Tracks, nodes and
the context are released on stop, cancel, a failed start and page hide.
- computePeaks / computePeaksFromAudio: normalised peaks of samples, a
buffer, or a stored base64 or Blob file.
- transcribeClip: POST /v1/audio/transcriptions, with the server's own
error message on failure.
- RealtimeTranscriber: the /v1/realtime?intent=transcription socket,
queueing audio until session.created, a final commit, and a typed
RealtimeUnsupportedError when the model cannot stream or the socket
is refused (a browser websocket cannot send the API key header).
- startVoiceSession and VoiceRecorder: try realtime, fall back to one
HTTP transcription of the clip, and expose levels and live text.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: add voice waveform and transcript components to Llama UI
Voice input needs three visuals that the app can feed with its own
recording and transcription logic: the live waveform while recording,
a playable waveform of a recorded clip, and a clip with its transcript
that opens on hover, keyboard focus or a tap.
VoiceWaveformLive draws input levels as many bars as fit the width,
newest on the right, and holds still with reduced motion.
VoiceWaveform plays a clip through its own audio element, fills the
played part in the primary colour, seeks by press, drag and arrow keys
(a slider) and pauses any other clip that was playing.
VoiceTranscriptReveal keeps the transcript in the DOM for screen
readers while it is closed, and shows transcribing and error states.
The waveform math (resampling peaks, bar capacity, seek and time
formatting) is in src/lib/voice with unit tests. The components are
exported from the package root and from @ggml-org/llama-ui/voice, which
Llama Chat resolves to the sources like the other entry points.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: add stories and tests for the voice components
Storybook gets UI/Blocks/Voice: the live waveform fed by a fake
microphone meter in a chat form row, the clip waveform in its sizes and
states, and the transcript reveal in each state and on touch. The demo
audio is a WAV synthesised in the story, so no binary file is added.
The play functions check seeking by keys and by press, the reveal on
hover, keyboard focus and a tap, and a clip without audio. Pressing play
needs a real click before a browser plays audio, so a client test covers
play and pause and one clip pausing another.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: store voice messages with their transcript and send it to models that cannot hear
A voice message recorded in the chat form is an audio attachment like an
uploaded file, plus what the app needs to draw and read it. The audio
attachment gets four optional fields: voice (recorded in the app),
transcript, peaks and durationMs. Stored rows, export and import carry
them as they are, so no migration is needed and older messages keep
working.
The transcript is for reading. A model with audio input still gets the
audio alone; a model without it (the user switched models later) gets the
transcript as a labelled text part in place of the audio. When the
model's modalities are not known yet, or there is no transcript, the
audio goes as before.
A transcript often comes back after the message was sent. The new
voiceTranscriptsStore follows each pending transcript by the clip's name,
hands it to a send that happens after it arrived, and otherwise writes it
into the stored attachment of the message it went out with, in the open
chat or, if the user left it, in the database.
Copying a message now includes its voice transcript.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: add Voice settings and resolve what the microphone does per model
The user should not have to think about which kind of voice input is in
use, so the app decides it from the conversation's model and two
settings. resolveVoiceMode is a small pure function: with Voice input on
Automatic and a chat model that has audio input, a recording is a voice
message, transcribed by that same model so a router swaps nothing.
Otherwise it is dictation, with the chat model when it can hear, else,
in router mode, with the chosen transcription model. When no model can
transcribe, the microphone is unavailable and says why.
Settings get a Voice section of their own rather than more rows in
General, which is already long: these four belong together and one of
them lists the server's models.
- Voice input: Automatic (default) or Always dictate.
- Transcription model: Same as chat model (default) or, in router mode,
any model with audio input; on a single-model server it only says
whether that model can transcribe. It notes that dictating with
another model loads it beside the chat model.
- Transcribe voice messages: on by default.
- Transcription language: empty for automatic.
The keys live in the settings registry like the others, so defaults,
storage, reset and export need nothing new. The model picker is drawn by
SettingsChatVoiceTab, the way Extensions and Tools draw their sections.
Assisted-by: Claude (Opus 5.5 Medium)
Co-authored-by: Nicolas Mowen <14866235+NickM-27@users.noreply.github.com>
* ui: record voice messages and dictation from the chat form
The microphone now does what the conversation's model allows, without
the user choosing a mode: its label says "Send a voice message" or
"Dictate", and when no model can take audio it is disabled and says why
(shown in router mode only when some model there has audio input, so the
reason can be acted on; a single-model server without audio keeps the
send button as before). The microphone errors keep their warning state
and toast, now also for the voice engine's own capture errors.
Recording goes through the voice engine's VoiceRecorder instead of the
MediaRecorder flow. While it records, the actions row becomes a
recording row: cancel, the live waveform, the elapsed time and stop.
Escape or cancel drops the recording. The form keeps its two rows while
recording, so the message stays visible on desktop and the row fits the
phone layouts and the expanded sheet.
- Dictation writes the live transcript into the message at the caret
as it streams. DictationSpan replaces only the dictated stretch, moves
it when the user types before it, keeps what is typed after it, and
hands text the user edits over to them. When nothing streams, the row
shows Transcribing... after stop and the text goes in once it is back.
Cancel takes the dictated text out again. No audio is attached.
- A voice message streams its live text, if any, under the waveform,
not into the message. On stop the clip is attached as a voice file
with its peaks and length, and its transcript is followed by the voice
transcripts store (unless Transcribe voice messages is off).
Realtime transcription is skipped for servers reached through a tunnel
or with an API key, which a browser websocket cannot carry. The first
dictation with a separate router model shows a one-time note that it
loads beside the chat model.
The form takes an optional voiceRecorder, so tests and stories can run
it without a microphone.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: draw audio attachments as playable waveforms with their transcript
A voice message should read as a clip, not as a file chip. Audio
attachments now render with Llama UI's VoiceWaveform inside
VoiceTranscriptReveal, through a direct branch in the core attachment
item (voice is core, so it does not go through the extension renderers):
the removable sm chip in the chat form, and the md clip in a sent
message, on the user bubble's surface.
- The audio plays from an object URL made from the stored base64 (or the
uploaded file's data URL), revoked when the clip leaves the screen.
- A clip stored without peaks, an older voice message or an uploaded
audio file, gets them computed from its audio once per session, in
memory only; uploaded files keep their name under the waveform.
- The transcript opens under the clip on hover, keyboard focus or a tap,
and shows Transcribing... while the voice transcripts store waits for
it, Transcription unavailable when it failed, and nothing when none
was asked for.
- The full-screen preview keeps its player and shows the transcript.
Tests run the chat form with a fake recorder: the microphone per mode,
the recording row, dictation around typed text, the Transcribing...
state, cancel, and a voice message chip whose transcript arrives later
and goes with the send. Stories show the form recording each kind, a
recorded chip, and sent voice messages with the transcript, pending,
and computed peaks.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: drop the old audio recorder and proxy realtime transcription in dev
The voice engine replaced AudioRecorder, so it goes. The dev server now
proxies WebSockets on /v1, so realtime transcription works under vite dev.
The VoiceCapture test waits for the tone to be recorded instead of a fixed
700 ms, which a loaded test run could miss.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: dictate with a model that is already loaded when the chat model cannot hear
The Transcription model setting's Automatic choice now falls back to a
router model with audio input that is already loaded, so dictating with a
text-only chat model works without picking a model and loads nothing.
A picked model still wins, and the empty value is a named constant.
Idea from upstream PR 27567, by NickM-27.
Assisted-by: Claude (Opus 5.5 Medium)
Co-authored-by: Nicolas Mowen <14866235+NickM-27@users.noreply.github.com>
* ui: fill the recording waveform, and open voice message transcripts
- The live waveform fills the row from the start: a recording shorter
than the row is stretched over all its bars, a longer one scrolls with
the newest level on the right. No dotted placeholder.
- A voice message's transcript is open under its clip, in the chat form
while it comes in and in the sent message, with the toggle beside it
to fold it.
- Settings > Voice > Collapse transcripts (off by default) keeps them
folded instead, opening on hover, keyboard focus or a tap.
Assisted-by: Claude (Opus 5.5 Medium)
(cherry picked from commit 2a93f2f948ed976e40f693ce5d3acf1168284b05)
* ui: record voice without ducking other audio, from the first word
- Voice input asks for the raw microphone signal: no echo cancellation,
noise suppression or auto gain. Echo cancellation made the system treat
a recording as a call, which lowers or interrupts other playback, and
auto gain faded the first words in.
- One AudioContext serves every recording, with the capture worklet
loaded once, suspended in between and, where the browser allows it,
without an output device, so recording never touches the speakers.
- The chat form prepares it when it gets focus (no microphone, so no
recording indicator), and a mouse starts recording on press.
- A recording starts counting once audio flows: until then the bar says
Starting... instead of running the timer. Development builds log how
long each step of a start took.
- Settings > Voice > Microphone: Automatic (the system default, or the
built-in microphone when the default is a Bluetooth headset, which
would switch to its low-quality call mode), System default, or a
listed microphone.
Assisted-by: Claude (Opus 5.5 Medium)
(cherry picked from commit 76643e7210d21617d734fdfde677e84af7273153)
* ui: show voice text live in the message box, and follow transcripts as spoken
- A model that hears but has no live ASR (e.g. LFM3-Omni) now gives text
while you record: the realtime client commits the audio piece by piece,
at the pauses the levels show, one piece at a time, and the final
commit takes only what is left.
- A voice message's live text shows as the empty message box's
placeholder. Clicking into the box makes it text to edit there, and
what is said next follows it. On stop the text leaves the box and goes
with the clip; when it was edited, the edit is the clip's transcript.
- Llama UI gains VoiceSpokenText and spokenLength(): spoken words in the
full foreground colour, which they keep, the rest muted. A clip's
transcript follows its playback (estimated over the parts with speech,
as there are no word timings), and live text brightens as it arrives.
- The recording bar has a send button that stops and sends in one go.
Assisted-by: Claude (Opus 5.5 Medium)
(cherry picked from commit ce773017f902f8a5690ab9ecca368cecb6427422)
* ui: let the capture test start with silence
A capture starts with its first audio block, which can come before a
stream's first sound, so the steady tone is checked from where it begins.
Assisted-by: Claude (Opus 5.5 Medium)
(cherry picked from commit a41ee5337b83fef685a5cbaff176925f1647ce9d)
* ui: show live voice text sooner, and keep silence from becoming "yeah"
- A model that transcribes per commit (LFM3-Omni) gets shorter pieces:
cut at a 0.35 s pause after speech, or at the next quiet moment once a
piece reaches 3 s, so the text follows the speaker within a few
seconds in dictation, the message box and voice mode.
- When the recording stops, the audio after the last piece is committed
only if speech was heard in it. LFM3-Omni transcribes a commit of pure
silence as "Yeah." (or "はい。"), which ended up at the end of the text.
A recording whose only piece is that rest still commits it.
Assisted-by: Claude (Opus 5.5 Medium)
(cherry picked from commit 43e52cbab0fba9d8e84b9491890a406e3c6c90f3)
* ui: transcribe a recording cut at pauses once more as a whole
Live text comes piece by piece, cut at the speaker's short pauses, and a
model reads each piece as a sentence of its own: "I went. To the store."
When the recording ends, one pass over the whole clip gives the final
text, punctuated by meaning, in dictation and in voice mode alike. The
pieces' text stays the live text until then, and is kept when that pass
fails or the recording is longer than two minutes.
Assisted-by: Claude (Opus 5.5 Medium)
(cherry picked from commit 359dd9632e6c88000a1d23c2575bd1e6fcdd9ec1)
* ui: give live text over HTTP for models without a realtime session
A model that hears but cannot hold a realtime session, such as
Qwen3-ASR, was transcribed only after the recording, so dictation
showed no text while speaking. The recording is now cut at the
speaker's pauses as with a realtime session, and each piece sent to
/v1/audio/transcriptions on its own, one at a time, its text joined
live. The audio is kept from the start, so what is said while the
socket answers goes with the first piece. The whole clip is still
transcribed once more at the end, and the pieces' text is kept if
that fails. A server a websocket cannot reach (an API key, a remote
server) gets live text the same way.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: say when the browser processes the microphone despite the raw request
The browser keeps one processing setting per microphone: while a call,
another tab or voice mode has it open with echo cancellation, a
dictation that asked for the raw signal is processed too, sounds
distant, and the system may lower other sound. The capture now warns
when it gets processing it did not ask for, and its development log
names the microphone, its rate and what processing is on.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: keep the microphone beside the stop and send buttons
While a reply streams, or once the message has text, the microphone no longer
gives way to the main button: it stays beside it as a quieter, secondary
button, so more can be dictated without clearing the message or waiting for
the reply.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: show the voice components' stories with Llama UI
VoiceWaveform and VoiceTranscriptReveal are Llama UI components, so their
stories move to the library's Storybook, under Llama UI/Voice, with the demo
audio they play. Llama Chat's Storybook shows them there too, and its own
voice stories take the demo audio from the library. VoiceWaveformLive stays
with Llama Chat, as its demo records through the chat form's microphone.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: add a noise suppression setting for voice input
Recordings stay raw by default. Settings > Voice can now switch the
browser's noise suppression on; echo cancellation and automatic gain stay
off either way, as they interrupt other sound and fade the first words in.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: keep live voice text coming when the room is never quiet
Pieces were cut only at a quiet moment, so with music or talk in the room
none was ever cut and no text showed until the recording ended. A piece half
as long again as its longest length is now cut where it is.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: add echo cancellation and automatic gain settings for voice input
Settings > Voice now has a switch for each kind of microphone processing the
browser offers. All three stay off by default, so recordings are raw; each
one says what switching it on costs.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: put the microphone after the stop button, filled like it
While a reply streams, the microphone is the last button of the row and
looks like the stop and skip buttons beside it, instead of a bare icon
before them.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: say when dictated text is being refined, and send it refined
After a recording with live text, the whole clip is transcribed once more
so pauses do not end sentences. The form now says so while that pass is
out, and a send asked for meanwhile waits for it, so the message goes out
with the refined text rather than the pieces.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: keep the send button in place and put the microphone beside it
The send button no longer gives way to the microphone on an empty
message. The microphone stands before it as a quieter, tertiary button,
with the same tooltip, warning and recording states as before.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: let a recording be sent while a reply streams, once it has words
While a reply streams, the recording row now shows its send button as
soon as the first transcribed words are in the message, so the
recording no longer has to be stopped first. The microphone also stays
beside the send button once a voice message is attached.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: raise quiet speech for transcription, and say when it is too quiet
A quiet microphone gave the model near silence to transcribe. A new
Voice setting, Boost quiet speech (on by default), raises speech to a
level speech models hear well, up to eight times louder: the audio
streamed for live text as it goes, and the whole recording in one pass
when it stops, so its first words get the same gain as the rest. Only
speech is measured, never the silence around it, loud speech is left
as it is, and a soft limiter keeps raised peaks from clipping. When
speech stays quiet even at the highest gain, the recording row says so.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: keep the voice engine free of app code
The engine in lib/voice imported the microphone messages from the app's
utils and the WAV type from its enums, the only two things keeping it
from moving into a package of its own. The microphone checks and
messages move into the engine (voice/support.ts), next to the capture
that needs them; the uploaded-file helpers stay in the app's utils.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: start voice sessions from one voice service
How a recording reaches the server (routes, API key, whether the
realtime socket can be used) and how the Voice settings become capture
and transcribe options were built inside the chat form's voice hook,
and copied into every other feature that records. VoiceService builds
them in one place: a feature asks it for its session options and adds
only its own callbacks.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: tell speech from the room in one place
The pause detector, the speech gain and (in voice mode) the listener for
speech over a reply each followed a noise floor with their own numbers.
A SpeechDetector now does it for all of them, in dB, with one set of
settings in VOICE_SPEECH.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: let any text field take dictation
Writing dictated text into a field (at the caret, around the user's
typing, replaced by the whole recording's text when it comes) moves out
of the chat form's hook into a plain createDictation(). The hook keeps
what is the chat form's own: voice messages, toasts and the hint.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: move the recording row into Llama UI
VoiceRecordingBar draws the row shown while recording (cancel, waveform
and time, send, and a caption or warning under it) from data alone, so
voice mode or a notes page can show the same row. The chat form passes
its labels and its microphone button as the stop button.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: keep the voice engine's Svelte recorder behind its own entry
VoiceRecorder, the one part of lib/voice written with runes, moves to
lib/voice/svelte, so the rest of the engine is plain TypeScript any app
can use without Svelte.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: move voice input into its own package, Llama Voice
The voice engine (capture, the speech signal, transcription over the
realtime socket or HTTP) and dictation into a text field move from the
app to ui/lib/voice as @ggml-org/llama-voice, so another app, such as a
notes app, can use them. The Svelte recorder is its ./svelte entry.
Llama Chat compiles the sources, as it does Llama UI's, and keeps its
server and settings wiring. The package has its own type check, tests
and build, and a CI job for them.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: show which model does what in voice input
The model picker and the Models manager mark each model that hears:
Dictation on the one that transcribes dictation, Speech to text on
transcription models such as Qwen3-ASR, and Voice on chat models that
take voice messages. A loaded model kept only for dictation sits apart
from the chat models, a model can be made the dictation model from its
row, and Settings > Voice groups the transcription models apart from
the chat models with audio input. A voice store now resolves what the
microphone does, for the chat form and the model lists alike.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: warn of a quiet microphone inside the recording row
The too-quiet line under the waveform made the form grow and jump. The
warning now stays inside the row: the waveform turns the warning colour,
an icon sits by the time, and the advice opens above the row in a
tooltip for a few seconds, then on hover or focus. Screen readers still
hear it when it appears.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: open the microphone while the pointer is on its button
The first seconds of a recording could come out quiet while the
microphone settled, and the too-quiet warning showed for them. With the
pointer or the focus on the microphone button, the microphone now opens
ahead of the press (only when the page may already use it, so nothing
asks), and the recording takes it at once; it is let go shortly after
the pointer leaves without a press. The warning also waits until the
speech has stayed too quiet for two seconds.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: tidy voice input after review
Fix a microphone left open when a recording is cancelled while it starts
or the pointer leaves while it opens, a capture that is still letting go
silencing the next one, and live text stopping after a realtime error.
Share the dictation model choice, the transcript lookup, base64 decoding,
PCM joining and stopping a stream instead of repeating them, and export
only Llama Voice's public API.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: pin Llama Voice's dev dependencies to Llama UI's versions
Assisted-by: Claude (Opus 5.5 Medium)
* ui: let demos speak into a synthetic microphone
Assisted-by: Claude (Opus 5.5 Medium)
* ui: keep the microphone for voice input, off the audio files entry
The attach menu's Audio Files entry used a microphone, which now sits
beside the form's own microphone button. The microphone stands for
recording and dictation only; a model's audio modality is headphones, and
the audio files entry is a file with headphones.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: set voice input on the slimmed design tokens
Voice input's components use the type roles, the one corner scale and
shadcn's utility names for the neutral colours, as the rest of Llama UI
and Llama Chat do since the design tokens were slimmed down.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: name voice states, platform strings, patterns and tunings
Addresses the review on the voice PR:
- Llama Voice: VoiceCaptureState, VoiceRecorderStatus, RealtimeState and
RealtimeUnsupportedReason are enums (src/enums.ts, exported); DOMException
names, AudioContext states, transcription form fields, socket protocols,
device kinds, worklet messages, error messages, regexes and tuning values
are named constants.
- Llama UI: VoiceTranscriptStatus, VoiceWaveformSize and
VoiceRecordingBarStatus are enums; KeyboardKey, MouseButton and PointerType
join its UI enums; the voice components' sizes, labels, timings, selectors
and patterns move to constants/voice.constants.ts. The voice unit tests
move from src to tests/unit.
- App: ChatFormVoiceState is an enum, the recording bar's status comes from a
map, and the voice code uses the enums above, BooleanString, HEADERS and
new voice constants in place of inline strings, regexes and numbers.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: keep all of Llama UI's tests under tests
The Model UI formatting spec moves to tests/unit and the button spec to
tests/client, next to the voice specs; the test projects now read only
tests/unit and tests/client.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: show a transcript's words without the model's own format
Qwen3-ASR names the language before its text (language French<asr_text>...) and
VibeVoice-ASR answers with timed segments as JSON, which the server passes on as they
are. The voice engine now takes both off, over HTTP and over the realtime socket, also
while segments still stream, so the message box and the clip show the words alone.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: dictate when a speech-to-text model is picked for the conversation
A speech-to-text model has audio input, so on Automatic the microphone recorded a voice
message for it, which such a model has nothing to answer with. It now dictates, as the
model's badge already says it is for.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: say why a live-only model cannot transcribe behind an API key
A browser websocket cannot send the API key, so the realtime socket is left out on a
server that needs one, and a model that only transcribes over it (Voxtral Realtime)
answers the HTTP route with a 501. The clip and the dictation toast now say so instead of
only that transcription is unavailable.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: pick the dictation model with a microphone on its row
The model that transcribes dictation was marked with a filled Dictation badge. It is now
marked by a red microphone among the row's actions in the model picker, beside the heart,
and every other model that hears shows the same microphone on hover: a click makes it the
transcription model, and a click on the chosen one hands the choice back to Automatic. The
badge keeps saying what kind of hearing model a row is, and the Models manager marks the
dictation model with a small microphone beside its name.
Assisted-by: Claude (Opus 5.5 Medium)
---------
Co-authored-by: Nicolas Mowen <14866235+NickM-27@users.noreply.github.com>
* ui: search message content and Discover models from the search dialog
The search dialog matched chat titles only. It now also scans what was
said in each chat (content, reasoning, tool calls and results, attachment
names and text), newest chat first, stopping at the first match per chat
and after 20 chats, and shows a snippet around the match. Ids, timestamps
and base64 payloads are not searched.
With Discover on, it also lists matching catalog models and, once typing
settles, Hugging Face repos; picking one opens Discover on that repo.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: keep the search dialog one width whatever it lists
The shared dialog sizes itself to its content from md up, so the search
was narrow while empty and widened as results came in. It now takes the
full max-w-2xl there, less a margin on narrower windows.
Assisted-by: Claude (Opus 5.5 Medium)
The unscoped llama-ui on npm is a 0.0.1 placeholder. After the scoped
publish, the workflow renames the same build and publishes it again at
the same version, with a readme note pointing at the scoped package.
Assisted-by: Claude (Opus 5.5 Medium)
llama-tts built the mtmd context from mtmd_context_params_default(), which hardcodes 4 threads, and never copied n_threads over, so -t never reach the mtmd side.
Copy params.cpuparams.n_threads into mtmd_params.n_threads, as mtmd-cli and the server do; with no -t this now follows the resolved default.
Verified: -t 1 now runs single-threaded, -t 4 is unchanged, and the produced WAV is identical.
Assisted-by: Claude
* fix(server-bench): prevent float bin-count TypeError in histogram generation
Symptom: benchmark crashes while generating gen_rate histogram.
Root cause: np.ceil(...) returns numpy.float64, and that value was used where an integer count/shape argument is required.
Fix: cast ceil result to int before +1, ensuring bin count is an integer.
Result: histogram path completes and gen_rate.png is generated reliably.
* Update scripts/server-bench.py
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@huggingface.co>
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@huggingface.co>
* ui: load highlight.js on first use
highlight.js and every lowlight language (~900 KB raw) moved out of
Llama Chat's first load into a chunk that loads with the first code block.
- @ggml-org/llama-ui/code: highlightCode stays synchronous. Until
highlight.js has loaded it returns the code escaped as plain text and
starts the load; a $derived or $effect that called it runs again once
it has loaded. New loadHighlighter() and isHighlighterLoaded().
- Markdown: rehype-highlight runs through a lazy rehype step, like
KaTeX's: the first message with a code block waits for it, every
other one renders in the same pass.
First-load JS of the chat page: 3.47 -> 2.56 MB raw, 1.05 -> 0.75 MB
gzip, 0.84 -> 0.60 MB brotli.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: load each highlight.js language on first use
highlight.js now loads one language at a time instead of all ~190 at
once with the first code block: every language is its own chunk, and
the core loads with the first one.
- @ggml-org/llama-ui/code: highlightCode looks a language or alias up
in a generated table (scripts/generate-highlight-languages.mjs), loads
it with the languages it embeds (CSS and JavaScript inside HTML, say)
and returns plain text until then; a $derived or $effect that called
it runs again once it has loaded. Auto-detection picks among lowlight's
37 common languages, loaded the first time something auto-detects.
New loadHighlightLanguages(), isHighlightLanguageLoaded(),
resolveHighlightLanguage() and getLoadedHighlightLanguages() replace
loadHighlighter() and isHighlighterLoaded().
- Markdown: rehypeLazyHighlight highlights with lowlight's core and the
languages a message uses, waiting only for one it is the first to use.
rehype-highlight is no longer in the pipeline, since it bundles
lowlight's common languages.
First-load JS of the chat page stays at 2.58 MB raw, 0.76 MB gzip,
0.61 MB brotli: no highlight.js code, only the 14 KB language table.
The first code block now loads its language (1-12 KB for most) and the
20 KB core instead of 900 KB.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: name the code-block class names and shell language as constants
Assisted-by: Claude (Opus 5.5 Medium)
A printable key pressed on the chat screen while no field, editor,
dialog or menu has focus now moves focus to the chat form, and the
character lands there.
Assisted-by: Claude (Opus 5.5 Medium)
* model: load `ffn_gate_up_exps` scales
The generic scale pass loads per-expert scales for ffn_gate_exps,
ffn_up_exps and ffn_down_exps but not for the merged ffn_gate_up_exps.
Load ~ffn_gate_up_exps_s there~ and expose it as ffn_up_exps_s ~when the layer
has no separate up tensor,~ since build_moe_ffn applies up_exps_s to the
merged gate_up output. Inkling 2 now passes the expert scales to
build_moe_ffn like the other MoE models.
* Update src/llama-model.cpp
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@huggingface.co>
* Update src/llama-model.h
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@huggingface.co>
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@huggingface.co>
* llama : move the indexer key rotation choice into the model classes
The KV cache forced a Hadamard rotation for the lightning indexer keys
based on a list of architectures. The virtual llama_model::indexer_k_rot()
now returns true for the same models. DeepSeek4.1 inherits from DeepSeek4
but was not in the list, so it overrides it back to false.
* llama : rename indexer_k_rot() to lid_k_hdmd()
* ui: drop component tokens that only alias a semantic token
A component token now exists only for what a component decides itself:
a value no semantic token has, or one that only this component changes
between themes. Components that take a semantic token as it is read it
directly, so 88 of the 118 component tokens go, with no change to what
is drawn.
Also drops semantic tokens that repeat another one (status-* is fill-*,
elevation-tooltip is elevation-surface), the unused info lamp tokens and
14 primitives nothing reads, and adds fg-soft for the label of an option
that is not the picked one (tabs, toggle group).
Assisted-by: Claude (Opus 5.5 Medium)
* ui: add a short summary on top of DESIGN.md
The rules most changes need, in one screen: components, colour, type,
shape, sizes, surfaces, tokens and no arbitrary values. The sections
below keep the detail.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: derive design tokens by rule and drop the alias layers
Semantic tokens are either a pick (a primitive per theme) or a derivation,
mixed from another semantic token by a fixed rule and declared once: hover
fills, status surfaces and lines, dark shadows (--elevation-strength), the
middle of a matte edge, a lamp's rim and glyph.
Primitives keep colours only. shadcn's colour names stay as Tailwind
utilities and no longer exist as variables; neutral semantic utilities that
duplicated them are gone.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: set all text through type roles and move off-scale values onto the scale
Tailwind's text sizes and bracketed sizes become the type roles, with a new
text-caption-sm (10px) for tags and counts. Body and caption roles no longer
set a weight, and line heights are written as Tailwind writes its own, so the
swap from text-sm and text-xs changes no pixel. A unit test keeps old sizes
from coming back.
Arbitrary values with a scale equivalent use it (z-20, max-w-4/5, min-w-32),
and the two easing curves repeated across the app are ease-out-quint and
ease-sheet. DESIGN.md is updated and regenerated.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: bump @ggml-org/llama-ui to 0.5.0
Removed and renamed tokens are breaking for an app that reads them.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: add a display type role for the biggest headline
The greeting on a new chat keeps its 30px from md up, now as text-display
instead of a Tailwind size.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: one corner scale, one set of shadows and three more derived tokens
Six corner roles named values Tailwind's rounded-md to rounded-4xl
already have, and components used the Tailwind names nine times out of
ten. The roles are gone; the whole scale is computed from --radius.
Tailwind's shadow sizes were restated next to the elevation tokens and
did not follow the theme, so they were five times fainter in dark. The
five uses take elevation tokens and a unit test keeps both from coming
back.
A button group's seam is the button's own text colour at 25%, the dark
status text is the dark status fill, and the pressed shadow scales with
--elevation-strength like the inset one.
Assisted-by: Claude (Opus 5.5 Medium)
The model modality icons match the ones the Llama apps use: glasses for
vision, headphones for audio. The attach menu's list of what the model
takes reads the same icons instead of its own microphone and picture.
Assisted-by: Claude (Opus 5.5 Medium)
graph_max_nodes() picked the nodes-per-tensor factor from lists of
architectures. Each model class now gives it through a new virtual,
llama_model::graph_nodes_per_tensor(), which defaults to 8. The
architectures that need 32 or 64 override it in models.h, and DFlash
keeps its hparams-based rule in dflash.cpp.
LoRA adapter nodes are now added for every architecture, not only for
the ones on the default factor.
* ui: move the reasoning effort into the model picker
The chat form's row no longer holds the reasoning button: the model
picker ends with a Reasoning row, in place of Manage models, that shows
the level in use and opens the levels under it. A phone's model drawer
has the same row. A desktop server with a single model, whose selector
opens the manager instead of a picker, keeps the button beside it.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: show a reasoning effort that is not the default on the model selector
Next to the model on the closed selector, a set level shows as its word,
and reasoning that is off as a small crossed-out lightbulb. At the
default, which leaves it to the model, nothing more shows.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: keep the model picker's footer in place while it opens in Safari
WebKit pins a bottom-sticky element against the scaled box of a parent
that zooms in, so the Reasoning row rode up over the model list until
the opening animation ended. The desktop picker now scrolls its search
and list in a box of their own, with the footer under it.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: keep Pele diagrams inert
Pele turns a node with `click ... href` into a live link, where Mermaid's
strict security level left diagrams without links. Unwrap every link in
Pele's output, keeping its children, so the inline block, the live-preview
editor, the preview dialog and the downloaded svg stay inert. The Diagrams
story's flowchart now carries click directives and its play test checks
that no link or href is left.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: open diagrams full screen, zoom around what is on screen
The diagram preview dialog fills the window on every device. The preview
places the diagram from its top left corner, so a zoom keeps a screen point
fixed: the wheel and a trackpad pinch zoom around the pointer, the buttons
and +/- keys around the middle of the screen, wherever the diagram has been
panned to. Two-finger pinch, double-click and arrow keys work too. The
diagram opens fitted and keeps fitting until panned or zoomed; Reset view
fits it again.
Adds MermaidPreview and DialogMermaidPreview stories with play tests and a
unit test for the zoom math.
Assisted-by: Claude (Opus 5.5 Medium)
* ui: add a diagrams trace to the demo fixtures
Assisted-by: Claude (Opus 5.5 Medium)
The MoE cache adds a slot lookup to every MoE layer, and with
--moe-cache-cpu-share a second expert path, but graph_max_nodes() did
not account for it. Models on the default 8*n_tensors budget with few
tensors per layer (cohere2moe: 443 tensors, 49 layers) overflow the
graph context when the cache is combined with a quantized KV cache
(K/V rotation), aborting in ggml_new_tensor with GGML_ASSERT(obj_new).
Fixes#32584
Assisted-by: Claude Opus 5.5
* tests: add CUDA-only MUL_MAT/MUL_MAT_ID cases with results above the fp16 range
IQ1_M weights have no MMQ kernel, so once the batch is bigger than the MMVQ
limit the path is dequantize + cuBLAS. These cases produce results around
1.3e5, past the fp16 max of 65504, so an fp16 result buffer turns them into inf
while the CPU reference stays finite. They are only added for the CUDA backend.
Vulkan deliberately accumulates quantized matmuls in fp16 at default precision
and would fail them by design.
* CUDA: use an fp32 result for quantized src0 in the cuBLAS fallback
On the F16 compute path, quantized weights went through cuBLAS with fp16
accumulation and an fp16 result buffer that was converted to fp32 afterwards.
Anything above 65504 became inf and the next layer turned into NaN (see #30951:
gpt-oss-120b with IQ1_M experts at -ub 512). Set prefer_f32_output for
quantized src0 so the GEMM still uses fp16 operands but accumulates and stores
in fp32, the same mode already used on Volta, RDNA4 and CDNA. Every other
quantized path already accumulates in fp32.
Diagnosis and fix by denizyuret in #30951.
* CUDA: keep the MUL_MAT_ID precision in the per-expert fallback
The per-expert dst_slice kept op = GGML_OP_NONE, so ggml_prec_get_acc returned UNDEFINED and a requested precision was ignored. Set the op to GGML_OP_MUL_MAT. Also revert the fp32 result change and remove the tests.
---------
Co-authored-by: JonSnow1807 <JonSnow1807@users.noreply.github.com>