Merge pull request 'Log verbosity filtering feature' (#20) from feat/verbosity-filter into main

Reviewed-on: #20

.woodpecker/pr-build.yaml

@@ -0,0 +1,26 @@
+# Build validation for pull requests (and pushes to main).
+#
+# Builds the full multi-arch image but does NOT push it anywhere — it only
+# proves the Dockerfile still builds for every supported architecture. This is
+# the gate Renovate automerge waits on: a dependency bump that breaks the build
+# fails this check and will NOT be automerged (and therefore never reaches
+# :stable or the routers).
+#
+# Reports pass/fail status back to Gitea, so it shows up as a required check on
+# the PR.
+
+when:
+  - event: pull_request
+  - event: push
+    branch: main
+
+steps:
+  - name: Build all arches (no push)
+    image: woodpeckerci/plugin-docker-buildx:6.1.0
+    privileged: true
+    settings:
+      repo: mikrotik-tailscale
+      platforms: linux/amd64,linux/arm64,linux/arm/v7
+      dry-run: true
+      build_args:
+        - OCI_VERSION=ci-${CI_COMMIT_SHA}

.woodpecker/release-tag.yaml

@@ -34,7 +34,7 @@ steps:
       - bao kv get -mount secret -field RENOVATE_TOKEN renovate > /woodpecker/git_token
 
   - name: Auto-tag mt.1 on Tailscale bump
-    image: alpine/git:2.49.1
+    image: alpine/git:v2.52.0
     environment:
       CI_REPO_URL: https://gitea.lumpiasty.xyz/lumpiasty/mikrotik-tailscale.git
     commands:

.woodpecker/release.yaml

@@ -43,7 +43,7 @@ steps:
       - 'printf "PLUGIN_PASSWORD=%s\n" "$(bao kv get -mount secret -field REGISTRY_PASSWORD container-registry)" >> /woodpecker/registry.env'
 
   - name: Build and push multi-arch image
-    image: woodpeckerci/plugin-docker-buildx:5.2.2
+    image: woodpeckerci/plugin-docker-buildx:6.1.0
     privileged: true
     settings:
       registry: gitea.lumpiasty.xyz

.woodpecker/renovate.yaml

@@ -46,7 +46,7 @@ steps:
       - bao kv get -mount secret -field GITHUB_COM_TOKEN renovate > /woodpecker/github_com_token
   - name: renovate
     # Renovate's built-in "woodpecker" manager tracks this image automatically.
-    image: renovate/renovate:43.194.0
+    image: renovate/renovate:43.207.4
     environment:
       # --- platform / target ---
       RENOVATE_PLATFORM: gitea

Dockerfile

@@ -19,10 +19,10 @@
 # =============================================================================
 # Stage 1: Build Tailscale combined binary (cross-compiled, runs natively)
 # =============================================================================
-FROM --platform=$BUILDPLATFORM golang:1.26.3-alpine@sha256:91eda9776261207ea25fd06b5b7fed8d397dd2c0a283e77f2ab6e91bfa71079d AS builder
+FROM --platform=$BUILDPLATFORM golang:1.26.4-alpine@sha256:a6a091eac01ceac4b97496fe2957a49b6cdd83365337d5f46f6f73710424e805 AS builder
 
-# renovate: datasource=github-releases depName=tailscale packageName=tailscale/tailscale
+# renovate: datasource=github-releases depName=tailscale packageName=tailscale/tailscale versioning=semver
-ARG TAILSCALE_VERSION=v1.98.3
+ARG TAILSCALE_VERSION=v1.98.5
 
 # Provided automatically by buildx for the target platform.
 ARG TARGETOS
@@ -40,6 +40,23 @@ RUN git clone --depth 1 --branch ${TAILSCALE_VERSION} \
 
 WORKDIR /src/tailscale
 
+# Inject a stderr verbosity filter into the tailscaled package.
+#
+# With logtail compiled out (ts_omit_logtail), tailscaled never installs
+# logpolicy (see `if buildfeatures.HasLogTail` in cmd/tailscaled/tailscaled.go),
+# so log output goes raw to stderr: the [v1]/[v2] verbosity tags embedded in
+# messages are neither parsed nor filtered, and --verbose has NO effect. The
+# result is constant log spam in the RouterOS container log (filter
+# "Accept: TCP" verdicts, "netcheck: [v1] report", "wg: [v2]" handshakes and
+# keepalives) — see tailscale/tailscale#12158 and #1548.
+#
+# The injected file (build-tagged ts_omit_logtail, so it's a no-op if logtail
+# is ever re-enabled) registers a log writer in init() that drops lines
+# carrying a [v1]+ tag, restoring the equivalent of logtail's StderrLevel=0
+# default. Setting TS_LOG_VERBOSITY=1 (or higher) in the container environment
+# disables the filter at runtime for debugging — no rebuild needed.
+COPY patches/stderr_verbosity_filter.go cmd/tailscaled/
+
 # Build a minimal combined binary (tailscale CLI + tailscaled daemon in one file).
 #
 # Tag strategy — ALLOWLIST, not blocklist:
@@ -69,6 +86,12 @@ WORKDIR /src/tailscale
 #                         trusted unix socket, so PermitRead/PermitWrite are
 #                         always false and EVERY CLI call (status, up, set, ...)
 #                         returns "access denied" (tailscale/tailscale#17873).
+#   ipnbus              — IPN bus watch. Without it, 'tailscale up' cannot wait
+#                         for completion: it fires config at the daemon and
+#                         returns immediately ("built with ts_omit_ipnbus; not
+#                         waiting for completion") WITHOUT printing the auth URL
+#                         or confirming success. Including it makes interactive
+#                         'up' behave normally (blocks, prints login URL).
 #
 # Everything else remains omitted, including (rationale):
 #   clientupdate  — DELIBERATELY removed. The built-in updater would download
@@ -111,6 +134,7 @@ RUN mkdir -p /out && \
           -e 's/ts_omit_health,\{0,1\}//g' \
           -e 's/ts_omit_iptables,\{0,1\}//g' \
           -e 's/ts_omit_unixsocketidentity,\{0,1\}//g' \
+          -e 's/ts_omit_ipnbus,\{0,1\}//g' \
           -e 's/,$//' \
     ) && \
     echo "Build tags: ${TAGS}" && \
@@ -150,6 +174,24 @@ RUN mkdir -p /out/usrlocalbin && \
     ln -s /usr/local/bin/tailscale.combined /out/usrlocalbin/tailscale && \
     ln -s /usr/local/bin/tailscale.combined /out/usrlocalbin/tailscaled
 
+# Entrypoint wrapper: enable IP forwarding inside the container's network
+# namespace, then exec tailscaled. tailscaled does NOT reliably enable IPv6
+# forwarding itself in a container netns ("IPv6 forwarding is disabled" warning),
+# which silently breaks advertised IPv6 subnet routes. The sysctls ARE writable
+# from inside a RouterOS container, so we set both here. Written in the builder
+# stage so it ships in the same single /usr/local/bin COPY layer (preserves the
+# overlayfs single-copy property). `exec` keeps tailscaled as PID 1.
+RUN printf '%s\n' \
+      '#!/bin/sh' \
+      '# Enable IPv4/IPv6 forwarding. Required for advertised subnet routes and' \
+      '# exit-node functionality.' \
+      'for f in /proc/sys/net/ipv4/ip_forward /proc/sys/net/ipv6/conf/all/forwarding; do' \
+      '  if [ -w "$f" ]; then echo 1 > "$f" 2>/dev/null || echo "warn: could not write $f"; fi' \
+      'done' \
+      'exec /usr/local/bin/tailscaled "$@"' \
+      > /out/usrlocalbin/entrypoint.sh && \
+    chmod +x /out/usrlocalbin/entrypoint.sh
+
 # =============================================================================
 # Stage 2: Custom minimal busybox
 # =============================================================================
@@ -171,7 +213,7 @@ RUN mkdir -p /out/usrlocalbin && \
 # This stage runs on the TARGET platform (no --platform override): gcc then
 # produces native target-arch binaries directly. Under buildx this is
 # transparently emulated via binfmt/QEMU for non-native targets.
-FROM alpine:3.21.7@sha256:48b0309ca019d89d40f670aa1bc06e426dc0931948452e8491e3d65087abc07d AS busybox
+FROM alpine:3.23.4@sha256:5b10f432ef3da1b8d4c7eb6c487f2f5a8f096bc91145e68878dd4a5019afde11 AS busybox
 
 # renovate: datasource=docker depName=busybox versioning=docker
 ARG BUSYBOX_VERSION=1.37.0
@@ -267,7 +309,9 @@ ENV PATH=/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
 # -----------------------------------------------------------------------------
 VOLUME ["/var/lib/tailscale"]
 
-ENTRYPOINT ["/usr/local/bin/tailscaled"]
+# entrypoint.sh enables IP forwarding (incl. IPv6) in the container netns, then
+# exec's tailscaled with the CMD flags below as its arguments.
+ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]
 
 # Default flags:
 #   --no-logs-no-support  disables logtail uploads (logtail binary code is

README.md

@@ -7,6 +7,8 @@ A minimal Tailscale Docker image built for MikroTik routers running
 16 MB internal flash. Built from source with only router-relevant features
 included.
 
+> Disclaimer: This project has been largely vibe-coded, but I stand behind design and implementation choices made.
+
 - **~4 MB** extracted rootfs (`FROM scratch` + UPX'd Tailscale binary + a custom
   static busybox debug shell).
 - **Multi-arch**: amd64, arm64, arm/v7 — one tag, RouterOS pulls the right one.
@@ -16,6 +18,23 @@ included.
 - **Flash-wear conscious**: minimal persistent state, no netmap disk-caching,
   tmpfs for scratch and runtime.
 
+## Motivation
+
+There is no built-in Tailscale integration in MikroTik, and other solutions
+feel underwhelming. I've used Fluent-networks' tailscale-mikrotik until now,
+but that basically forced me to connect external storage to my router
+just to use Tailscale. This approach, while works, is fragile, wasteful
+and overcomplicated, so I decided to do better one myself.
+
+| | **This project** | Fluent-networks/tailscale-mikrotik |
+|---|---|---|
+| Size | **~4 MB** | ~106 MB |
+| Size reduction technique | **Minimal container with custom Tailscale and Busybox builds, compressed by UPX** | Alpine Linux base, Tailscale binary compressed by UPX on build, but auto-update completely nullifies that on first launch |
+| Update mechanism | **Automatically released optimized container images with new Tailscale versions, scheduled script updating deployment on new version** | None, opt-in Tailscale built-in auto-update downloading official binaries |
+| Flash wear | **Write-heavy functionality compiled out, suitable for low-endurance flash chips** | High, constant netmap cache updates |
+| Stability | **Immutable container** | Tailscale app can update on its own |
+| Features | **Only router-useful Tailscale features compiled, Busybox providing shell and utils** | Full tailscale, OpenSSH server, Bash, IPTables |
+
 ## Documentation
 
 - **[Usage](docs/USAGE.md)** — deploy the published image on a MikroTik router
@@ -51,6 +70,7 @@ ARMv5 (hEX Refresh / hAP ax S) is **not** supported — see
 |---|---|
 | `Dockerfile` | Multi-stage, multi-arch build (cross-compiled Go + custom busybox) |
 | `busybox-applets.config` | Curated busybox applet set |
+| `patches/` | Source files injected into the Tailscale tree at build time (stderr verbosity filter) |
 | `build.sh` | Build all/one arch, optionally export per-arch tarballs |
 | `routeros/update-tailscale.rsc` | RouterOS auto-update script (digest compare + recreate) |
 | `.woodpecker/` | CI: Renovate cron, release tagging, multi-arch publish |

docs/DESIGN.md

@@ -28,10 +28,12 @@ Measured flattened rootfs for the arm64 image:
 | arm64  | ~3.5 MB |
 | arm/v7 | ~3.5 MB |
 
-> The extracted rootfs must contain the binary only **once**. If you measure
+On a deployed RouterOS device the container consumes **~3.7 MiB of flash**
-> ~7 MB on the device with `du -sx /`, the Dockerfile has reintroduced an
+(measured by `free-hdd-space` delta). Note that `du` *inside* the container
-> overlayfs copy-up — see
+reports roughly double that (~7 MB) — that is RouterOS block-allocation
-> [Avoiding overlayfs layer duplication](#avoiding-overlayfs-layer-duplication).
+rounding, **not** real usage or duplication; see
+[Avoiding overlayfs layer duplication](#avoiding-overlayfs-layer-duplication)
+for how to measure correctly.
 
 The binary is built with Tailscale's `--extra-small` feature tag set as the
 baseline. Features are opted in explicitly — any new feature Tailscale adds
@@ -68,38 +70,64 @@ in a future release stays omitted until deliberately added to the Dockerfile.
   saves a real ~195 kB of flash (424 kB → 229 kB), not just transfer size.
 
 The final image is built `FROM scratch` — there is no base distro layer.
-It contains only the busybox binary + applet symlinks, the CA bundle, and
+It contains only the busybox binary + applet symlinks, the CA bundle, the
-the Tailscale binary.
+Tailscale binary, and a tiny `entrypoint.sh`.
+
+### Entrypoint: IP forwarding
+
+`ENTRYPOINT` is a small `entrypoint.sh` that enables IPv4 and IPv6 forwarding
+(`net.ipv4.ip_forward`, `net.ipv6.conf.all.forwarding`) in the container's
+network namespace, then `exec`s `tailscaled` (so the daemon stays PID 1). This
+is necessary because `tailscaled` does **not** reliably enable IPv6 forwarding
+itself inside a container netns — it logs "IPv6 forwarding is disabled" and
+advertised IPv6 subnet routes silently fail. The sysctls are writable from
+inside a RouterOS container, so the entrypoint sets them directly; no
+host-side or `/container` configuration is required. The script is created in
+the builder stage so it ships in the same single `/usr/local/bin` `COPY` layer
+(preserving the [single-copy property](#avoiding-overlayfs-layer-duplication)).
 
 ### Avoiding overlayfs layer duplication
 
-A subtle but important detail: **the final image must not run a `RUN` that
+Best practice for the final image: **don't run a `RUN` that mutates a directory
-mutates a directory already populated by an earlier layer**, or the extracted
+already populated by an earlier layer.** Each Dockerfile instruction is its own
-on-disk size roughly doubles for that directory's contents.
+layer; if `/usr/local/bin/` is created by a `COPY` (containing the ~3 MB
-
+`tailscale.combined`) and a later `RUN ln -s …` adds a symlink *inside that same
-RouterOS Container uses overlayfs and stores the **extracted** layers on disk.
+directory*, overlayfs performs a **copy-up** of the entire directory — including
-Each Dockerfile instruction is its own layer. If `/usr/local/bin/` is created by
+the 3 MB binary — into the new layer. The binary then physically exists in two
-a `COPY` (containing the ~3 MB `tailscale.combined`) and a later `RUN ln -s …`
+image layers.
-adds a symlink *inside that same directory*, overlayfs performs a **copy-up**:
-it copies the entire `/usr/local/bin/` directory — including the 3 MB binary —
-into the new layer's upper dir. RouterOS then extracts both copies to flash, so
-`du -sx /` reports ~7 MB instead of ~3.4 MB for a directory whose only real file
-is 3 MB. (The compressed image hides this — compression dedupes identical blocks
-— which is why it only shows up when you measure the *extracted* rootfs on the
-device.)
 
 The fix: assemble `/usr/local/bin/` completely in the **builder** stage (binary
 + both `argv[0]` symlinks) and bring it into the final image with a **single
 `COPY` layer**, never mutating it afterwards. The Dockerfile does this; don't
-reintroduce a post-`COPY` `RUN` against that path.
+reintroduce a post-`COPY` `RUN` against that path. You can confirm the published
-
+image carries the binary in exactly one layer:
-To verify the extracted footprint on a deployed router:
 
 ```
-/container/shell [find where name=tailscale]
+docker save <image> -o img.tar && tar xf img.tar -C img/
-du -sx /        # expect ~3500 KiB (1 KiB blocks), not ~7000
+# then grep each blob layer for usr/local/bin/tailscale.combined — it must
+# appear in exactly ONE layer.
 ```
 
+Note: this is about keeping the *image* clean. It does **not** change what `du`
+reports on the device — see the measurement note below.
+
+To verify the on-flash footprint on a deployed router, use the **free-space
+delta**, not `du`:
+
+```
+/system/resource/print     # note free-hdd-space before and after adding the container
+```
+
+The container should consume **~3.7 MiB** of flash (e.g. 94.6 → 90.9 MiB free).
+
+Do **not** trust `du` inside the container for this. Busybox `du` reports
+*allocated blocks*, and RouterOS's container store rounds a ~3 MB file up to
+~6 MB of blocks — so `du -sx /` reports ~7 MB even though real flash use is
+~3.7 MB. `ls -la /usr/local/bin` confirms the binary's true content size
+(~3.1 MB) and that it is a single file with two symlinks (no duplication).
+The image itself carries the binary in exactly one layer (verified at the blob
+level); the inflation is purely the filesystem's block accounting.
+
 ## Architecture support
 
 A single Dockerfile builds all three supported RouterOS architectures. The Go
@@ -128,6 +156,7 @@ that's a separate build, not just a `--platform` change.
 | iptables | Linux iptables support for routing rules |
 | osrouter | Configure kernel network stack and routing tables |
 | unixsocketidentity | **Required** — without it the localapi denies every CLI call with "access denied" ([tailscale#17873](https://github.com/tailscale/tailscale/issues/17873)) |
+| ipnbus | Lets `tailscale up` wait for completion and print the login URL; without it `up` returns immediately without confirming success |
 
 ## Features intentionally omitted
 
@@ -135,7 +164,7 @@ that's a separate build, not just a `--platform` change.
 |---|---|
 | `clientupdate` | **Deliberately removed** — see [Why the built-in updater is removed](#why-the-built-in-updater-is-removed) |
 | `cachenetmap` | **Deliberately removed** — see [Why netmap disk-caching is removed](#why-netmap-disk-caching-is-removed) |
-| `logtail` | Would attempt persistent log writes; wear flash |
+| `logtail` | Would attempt persistent log writes; wear flash. Removing it also removes stderr verbosity filtering — restored by an injected filter, see [Log verbosity filtering](#log-verbosity-filtering) |
 | `netlog` | Network flow logging; separate concern |
 | `netstack` + `gro` | Userspace/gVisor networking; router uses kernel TUN |
 | `ssh` | Access via MikroTik SSH + `tailscale` CLI instead |
@@ -197,6 +226,54 @@ the in-memory resilience (the common case) while eliminating per-netmap flash
 writes. Only `tailscaled.state` (written on auth / key rotation) ever touches
 flash.
 
+### Log verbosity filtering
+
+Upstream `tailscaled` embeds verbosity tags (`[v1]`, `[v2]`, …) inside its log
+messages and relies on the **logtail** subsystem to act on them: in a stock
+build, logtail's log policy intercepts everything written via the standard
+`log` package, parses the tag, and only writes a line to stderr when its level
+is within `--verbose` (default 0 — non-verbose messages only). The `--verbose`
+flag is literally wired into logtail (`pol.SetVerbosityLevel(args.verbose)` in
+`cmd/tailscaled/tailscaled.go`).
+
+This build omits logtail (`ts_omit_logtail`) to avoid log-upload code and
+flash writes — but that removed the stderr filtering along with it, as
+collateral damage. The result: every verbose line went **unfiltered** to
+stderr and into the RouterOS container log, with the literal `[v1]` tag still
+in the text. On an active node that means constant spam, several lines per
+minute:
+
+```
+tailscale: ... [v1] Accept: TCP{...:53256 > ...:50000} 391 tcp non-syn
+tailscale: ... netcheck: [v1] report: udp=true v6=true ... derp=22 ...
+tailscale: ... wg: [v2] [0GwzF] - Receiving keepalive packet
+```
+
+This is a [known](https://github.com/tailscale/tailscale/issues/12158)
+[long-standing](https://github.com/tailscale/tailscale/issues/1548) complaint
+even in full builds, and RouterOS logging offers no way to discard matching
+messages (no drop action, rules are all-match — a regex rule duplicates rather
+than diverts).
+
+The fix here: the build injects a ~20-line Go file
+(`patches/stderr_verbosity_filter.go`, copied into `cmd/tailscaled/` before
+`go build`) whose `init()` wraps the standard log output and silently drops
+any line carrying a `[v1]`/`[v2]`/`[v3]` tag. This restores the exact
+equivalent of logtail's default `StderrLevel=0` behavior without pulling in
+the upload machinery. Properties:
+
+- **No upstream sources modified** — it's a new file in the package, so it
+  survives Tailscale version bumps without rebasing (only relies on the
+  daemon using the stdlib `log` package, which is core behavior).
+- **Build-tagged `//go:build ts_omit_logtail`** — if logtail is ever
+  re-enabled, the file compiles out automatically and logtail's own filtering
+  takes over; the two can never conflict.
+- **Runtime escape hatch** — setting the `TS_LOG_VERBOSITY=1` environment
+  variable disables the filter (and, conveniently, the same knob is read by
+  upstream as the default `--verbose` level). Verbose logs are one
+  `/container/envs/add` away; no rebuild needed. See
+  [USAGE.md → Logging](USAGE.md#logging).
+
 ## Volume layout
 
 Two mount points, with different persistence requirements:
@@ -309,14 +386,35 @@ run **self-hosted** from a Woodpecker cron pipeline (Woodpecker has no native
 Renovate support):
 
 - `renovate.json` — repository rules. All dependencies follow the latest
-  upstream releases (including major versions); each bump arrives as its own PR
+  upstream releases; each bump arrives as its own PR. Base image tags also get
-  that the multi-arch build validates before you merge. Base image tags also
+  their `@sha256` digests refreshed via `pinDigests`. Notable rules:
-  get their `@sha256` digests refreshed via `pinDigests`. The one special rule:
   - `tailscale` only follows **stable** releases — Tailscale uses even minor
     versions for stable (`v1.98.x`) and odd for unstable (`v1.99.x`), so the
     rule filters to even minors.
 - `.woodpecker/renovate.yaml` — the scheduled job that runs `renovate/renovate`
   against this repo.
+- `.woodpecker/pr-build.yaml` — builds all three arches (no push) on every PR
+  and reports status to Gitea. This is the gate for automerge.
+
+### Automerge policy
+
+These updates **automerge** once the PR build passes — they reach `:stable`
+(and the routers) without manual review:
+
+| Update | Automerge? | Why |
+|---|---|---|
+| Tailscale stable (patch **and** minor) | ✅ | the point of the project; the PR build catches breakage |
+| Go / Alpine / busybox **patch** | ✅ | bugfix-only, build-internal |
+| Base-image **digest** refresh (same tag) | ✅ | content refresh, no version change |
+| Go / Alpine / busybox **minor/major** | ❌ manual | larger toolchain/base changes warrant review |
+| Renovate runner, syntax frontend | ❌ manual | tooling — review deliberately |
+
+**Important:** automerge depends on the PR build being a **required status
+check** in Gitea branch protection. The PR build only proves the image *builds*
+for all arches — it does not run the daemon, so a runtime regression in a new
+Tailscale release could still be automerged. That is an accepted trade-off for
+the convenience of unattended Tailscale updates; if a release misbehaves, roll
+back by re-tagging the previous `v…-mt.N` (the immutable tags are kept).
 
 Validate the configs locally:
 

docs/USAGE.md

@@ -10,64 +10,58 @@ reasoning behind these choices, see [DESIGN.md](DESIGN.md).
 ## Deploy on MikroTik (RouterOS)
 
 Verified on RouterOS 7.21.2 (arm64, CRS418). Commands are grouped into
-copy-paste blocks; **only the values marked `CHANGE ME` need editing**.
+copy-paste blocks, defaults should fit most configurations.
 
 > Because the image has no built-in updater (the `clientupdate` feature is
 > [intentionally compiled out](DESIGN.md#why-the-built-in-updater-is-removed)),
-> updates are handled by a small script that only re-pulls when the published
+> updates are handled by a small script that recreates container when
-> image actually changed — see [step 7](#7-enable-automatic-updates).
+> the update is published — see [step 7](#7-enable-automatic-updates).
 
 ### 0. Prerequisites
 
-- RouterOS 7.x with the **container** package installed.
+- RouterOS >7.13 with the **container** package installed.
-- Container mode enabled (needs physical access — press reset / cold-boot when
+- Container mode enabled ([documentation](https://manual.mikrotik.com/docs/System%20Information%20and%20Utilities/device-mode/#changing-mode-of-device-mode)):
-  prompted):
 
   ```
   /system/device-mode/update container=yes
   ```
 
-- A Tailscale **auth key** from the admin console
+### 1. Networking (veth + routing)
-  (**Settings → Keys**, reusable, optionally tagged). You'll use it in step 6.
 
-### 1. Networking (veth + bridge + NAT)
+Gives the container an internal IP and configures routing to the tailnet.
-
+Pick a subnet that doesn't clash with your LAN.
-Gives the container an internal IP and outbound internet via NAT. Pick a subnet
-that doesn't clash with your LAN.
 
 ```
 /interface/veth/add name=veth-tailscale address=172.20.0.2/24 gateway=172.20.0.1
 /interface/bridge/add name=containers
 /ip/address/add address=172.20.0.1/24 interface=containers
 /interface/bridge/port/add bridge=containers interface=veth-tailscale
-/ip/firewall/nat/add chain=srcnat action=masquerade src-address=172.20.0.0/24
+/ip/route/add dst-address=100.64.0.0/10 gateway=172.20.0.2 comment=Tailnet
 ```
 
+If you want the router to have access to subnets shared by other tailscale nodes,
+add route for each one.
+
+```
+/ip/route/add dst-address=[subnet CIDR] gateway=172.20.0.2 comment="Another network via tailscale"
+```
+
+If you want to share your LAN via tailscale, add it as an advertised route in
+[step 5](#5-authenticate). You may also need additional firewall configuration
+to accept connections to or from tailnet if you have one configured.
+You should not need any additional NAT rules.
+
 ### 2. Extraction scratch dir (tmpfs)
 
 Put the image extraction scratch dir on **tmpfs** (RAM) so the pull/extract
-never writes to flash:
+happen in RAM and doesn't fill up or wear out flash:
 
 ```
 /disk/add type=tmpfs tmpfs-max-size=256M slot=tmp
 /container/config/set tmpdir=tmp
 ```
 
-> **No `registry-url` change needed.** This guide puts the full registry host in
+### 3. Persistent state mount (the only thing on flash)
-> `remote-image` (step 5), and RouterOS pulls directly from that host — the
-> global `registry-url` is ignored when the image reference includes a host.
-> This is intentional: it leaves your existing `registry-url` untouched, so
-> other containers (e.g. ones pulling from Docker Hub or ghcr.io) keep working,
-> and multiple registries can be used side by side.
-
-### 3. Authentication note (no env needed)
-
-This image runs `tailscaled` directly and does **not** bundle Tailscale's
-`containerboot` wrapper, so the `TS_AUTHKEY` environment variable is **not**
-read automatically. You authenticate with `tailscale up --authkey=...` after the
-container starts (step 6) — this keeps the image minimal and needs no env list.
-
-### 4. Persistent state mount (the only thing on flash)
 
 Only the tiny `tailscaled.state` (node identity / key) needs to persist. Mount
 just that directory:
@@ -76,14 +70,7 @@ just that directory:
 /container/mounts/add list=tailscale_state src=tailscale/state dst=/var/lib/tailscale
 ```
 
-`src=tailscale/state` is on internal storage. This holds `tailscaled.state`
+### 4. Add and start the container
-(and `derpmap.cached.json`), written only on auth / key rotation / prefs
-change — **not** on every netmap update, because netmap disk-caching is omitted
-([why](DESIGN.md#why-netmap-disk-caching-is-removed)). Flash wear is therefore
-minimal. If you want *zero* persistent writes, point `src` at a tmpfs disk slot
-instead and accept re-authentication after a reboot.
-
-### 5. Add and start the container
 
 ```
 /container/add \
@@ -106,16 +93,25 @@ Wait for the pull/extract to finish (`status=stopped`), then start it:
 
 The daemon is now running but **not yet authenticated**.
 
-### 6. Authenticate
+### 5. Authenticate
 
-Enter the container shell and bring Tailscale up with your auth key. You can set
+> This image runs `tailscaled` via a tiny entrypoint (which enables IP
-subnet routes / exit-node advertisement in the same command:
+forwarding, then `exec`s the daemon) and does **not** bundle Tailscale's
+`containerboot` wrapper, so the `TS_AUTHKEY` environment variable is **not**
+read automatically. You authenticate with `tailscale up --authkey=...` after the
+container starts.
+
+Enter the container shell and bring Tailscale up with your auth key.
+Use `tailscale up --help` to see list of commands, customize it to your needs,
+add subnets (eg. your LAN) or exit-node advertisements in command below.
 
 ```
 /container/shell [find where name=tailscale]
 # inside the container — CHANGE ME: your key (and adjust routes/subnet):
 tailscale up --authkey=tskey-auth-CHANGEME \
-  --advertise-routes=192.168.88.0/24 \
+  --accept-routes \
+  --snat-subnet-routes=false \
+  --advertise-routes=172.20.0.0/24 \
   --advertise-exit-node
 exit
 ```
@@ -124,7 +120,7 @@ The node now appears in your Tailscale admin console. Approve the advertised
 routes / exit node there. Because the auth state is written to the persisted
 `tailscaled.state`, you only do this once — it survives reboots and updates.
 
-### 7. Enable automatic updates
+### 6. Enable automatic updates
 
 First, edit the `CONFIG` block at the top of `routeros/update-tailscale.rsc` if
 you changed any names in the steps above. The defaults match this guide
@@ -136,8 +132,6 @@ create a **named script** from it and schedule it:
 
 ```
 # Create the named script from the uploaded file's contents.
-# (Do NOT use `/import` — that just runs the file once and does not create a
-#  reusable script for the scheduler to call.)
 /system/script/add name=update-tailscale source=[/file/get update-tailscale.rsc contents]
 
 # Run it daily.
@@ -179,14 +173,48 @@ queries to Tailscale's magic DNS resolver:
 add name="ts.net" type=FWD forward-to=100.100.100.100 match-subdomain=yes
 ```
 
-This avoids writing to `/etc/resolv.conf` inside the container (which would
+When this is configured, you can connect to other tailscale machines using
-happen if `--accept-dns` is passed to `tailscale up`). The container resolves
+`[device name].[tailnet name].ts.net`. You can see and change assigned
-Tailscale node names; the rest of the router uses its own DNS.
+Tailnet DNS name in Tailscale admin panel under DNS tab.
+
+## Logging
+
+The container logs to the RouterOS log (topic `container`) via `logging=yes`.
+
+Upstream `tailscaled` is notoriously chatty: by default it would emit a line
+for every accepted connection (`Accept: TCP{...}`), every netcheck report, and
+every WireGuard handshake/keepalive — several lines per minute on an active
+node ([tailscale#12158](https://github.com/tailscale/tailscale/issues/12158)).
+This image filters those verbose (`[v1]`/`[v2]`-tagged) messages out at the
+source, so only meaningful messages (startup, auth, route changes, warnings,
+errors) reach the RouterOS log. See
+[DESIGN.md → Log verbosity filtering](DESIGN.md#log-verbosity-filtering) for
+how and why.
+
+To temporarily get the verbose logs back for debugging (e.g. NAT-traversal
+issues), set the `TS_LOG_VERBOSITY` environment variable and recreate the
+container with the envlist attached:
+
+```
+/container/envs/add list=tailscale_envs name=TS_LOG_VERBOSITY value=1
+/container/set [find where name=tailscale] envlist=tailscale_envs
+/container/stop [find where name=tailscale]
+/container/start [find where name=tailscale]
+```
+
+Any value ≥ 1 disables the filter (and raises the daemon's own verbosity by
+the same amount). Remove the variable and restart to silence it again:
+
+```
+/container/envs/remove [find where name=TS_LOG_VERBOSITY]
+/container/stop [find where name=tailscale]
+/container/start [find where name=tailscale]
+```
 
 ## Updating
 
 You don't normally do anything: when a new release is published, the
-auto-update script ([step 7](#7-enable-automatic-updates)) detects the changed
+auto-update script ([step 6](#6-enable-automatic-updates)) detects the changed
 `:stable` image on its next scheduled run and recreates the container. Your
 node identity and settings persist across the update via the state mount.
 

patches/stderr_verbosity_filter.go

@@ -0,0 +1,45 @@
+// Copyright (c) mikrotik-tailscale build. Injected at image build time.
+// SPDX-License-Identifier: BSD-3-Clause
+
+//go:build ts_omit_logtail
+
+package main
+
+// When logtail is compiled out (ts_omit_logtail), logpolicy is never
+// installed (see run() in tailscaled.go: `if buildfeatures.HasLogTail`),
+// so log.Printf output goes raw to stderr. Nothing parses the [v1]/[v2]
+// verbosity tags Tailscale embeds in log messages, which means every
+// verbose line (filter "Accept: TCP", "netcheck: [v1] report",
+// "wg: [v2]" handshakes/keepalives) is printed regardless of --verbose.
+//
+// This restores the equivalent of logtail's StderrLevel=0 behavior:
+// drop lines carrying a [v1]+ tag, unless TS_LOG_VERBOSITY is set to
+// 1 or higher (runtime escape hatch for debugging — no rebuild needed).
+
+import (
+	"bytes"
+	"log"
+	"os"
+)
+
+var verboseLogTags = [][]byte{[]byte("[v1] "), []byte("[v2] "), []byte("[v3] ")}
+
+type stderrVerbosityFilter struct{ w *os.File }
+
+func (f stderrVerbosityFilter) Write(p []byte) (int, error) {
+	for _, tag := range verboseLogTags {
+		if bytes.Contains(p, tag) {
+			// Claim success so the log package doesn't complain;
+			// the line is intentionally discarded.
+			return len(p), nil
+		}
+	}
+	return f.w.Write(p)
+}
+
+func init() {
+	if v := os.Getenv("TS_LOG_VERBOSITY"); v != "" && v != "0" {
+		return
+	}
+	log.SetOutput(stderrVerbosityFilter{os.Stderr})
+}

renovate.json

@@ -7,17 +7,58 @@
   ],
   "labels": ["dependencies"],
   "rebaseWhen": "behind-base-branch",
-  "dockerfile": {
+  "customManagers": [
-    "pinDigests": true
+    {
-  },
+      "customType": "regex",
+      "description": "Update version ARGs annotated with a `# renovate:` comment (the dockerfile manager only handles FROM/image lines, not ARG values).",
+      "managerFilePatterns": ["/(^|/)Dockerfile$/"],
+      "matchStrings": [
+        "#\\s*renovate:\\s*datasource=(?<datasource>\\S+)\\s+depName=(?<depName>\\S+)(?:\\s+packageName=(?<packageName>\\S+))?(?:\\s+versioning=(?<versioning>\\S+))?\\s+ARG \\w+=(?<currentValue>\\S+)"
+      ],
+      "matchStringsStrategy": "any"
+    }
+  ],
   "packageRules": [
+    {
+      "matchManagers": ["dockerfile"],
+      "description": "Keep base-image tags pinned to a digest.",
+      "pinDigests": true
+    },
     {
       "matchDatasources": ["github-releases"],
       "matchPackageNames": ["tailscale/tailscale"],
-      "description": "TAILSCALE_VERSION ARG: only stable releases. Tailscale uses EVEN minor versions for stable (v1.98.x); ODD minors (v1.99.x) are unstable, so filter to even minors and ignore pre-releases.",
+      "description": "TAILSCALE_VERSION ARG: only stable releases. Tailscale uses EVEN minor versions for stable (v1.98.x); ODD minors (v1.99.x) are unstable, so filter to even minors and ignore pre-releases. The `v` prefix is kept (no extractVersion) so the ARG value stays v-prefixed to match the git tags cloned in the Dockerfile.",
-      "extractVersion": "^v(?<version>\\d+\\.\\d+\\.\\d+)$",
+      "allowedVersions": "/^v\\d+\\.\\d*[02468]\\.\\d+$/",
-      "allowedVersions": "/^\\d+\\.\\d*[02468]\\.\\d+$/",
       "ignoreUnstable": true
+    },
+    {
+      "matchDatasources": ["github-releases"],
+      "matchPackageNames": ["tailscale/tailscale"],
+      "description": "Automerge all stable Tailscale releases (patch AND minor) once the PR build passes.",
+      "matchUpdateTypes": ["minor", "patch"],
+      "automerge": true
+    },
+    {
+      "matchManagers": ["dockerfile"],
+      "matchPackageNames": ["golang", "alpine"],
+      "description": "Automerge PATCH-only bumps of build components (Go/Alpine) once the PR build passes; review minor/major manually.",
+      "matchUpdateTypes": ["patch"],
+      "automerge": true
+    },
+    {
+      "matchDatasources": ["docker"],
+      "matchPackageNames": ["busybox"],
+      "description": "busybox ARG (custom manager): automerge PATCH bumps once the PR build passes; review minor/major manually.",
+      "matchUpdateTypes": ["patch"],
+      "automerge": true
+    },
+    {
+      "matchManagers": ["dockerfile"],
+      "matchUpdateTypes": ["digest", "pinDigest"],
+      "description": "Automerge base-image digest refreshes (same tag, new sha256) once the PR build passes.",
+      "automerge": true
     }
-  ]
+  ],
+  "automergeType": "pr",
+  "platformAutomerge": true
 }