Merge pull request 'chore(deps): update golang docker tag to v1.26.4' (#16) from renovate/golang-1.x into main

Reviewed-on: #15

.woodpecker/renovate.yaml

@@ -46,7 +46,7 @@ steps:
       - bao kv get -mount secret -field GITHUB_COM_TOKEN renovate > /woodpecker/github_com_token
   - name: renovate
     # Renovate's built-in "woodpecker" manager tracks this image automatically.
-    image: renovate/renovate:43.205.3
+    image: renovate/renovate:43.207.4
     environment:
       # --- platform / target ---
       RENOVATE_PLATFORM: gitea

Dockerfile

@@ -19,10 +19,10 @@
 # =============================================================================
 # Stage 1: Build Tailscale combined binary (cross-compiled, runs natively)
 # =============================================================================
-FROM --platform=$BUILDPLATFORM golang:1.26.3-alpine@sha256:91eda9776261207ea25fd06b5b7fed8d397dd2c0a283e77f2ab6e91bfa71079d AS builder
+FROM --platform=$BUILDPLATFORM golang:1.26.4-alpine@sha256:f23e8b227fb4493eabe03bede4d5a32d04092da71962f1fb79b5f7d1e6c2a17f AS builder
 
-# renovate: datasource=github-releases depName=tailscale packageName=tailscale/tailscale
+# renovate: datasource=github-releases depName=tailscale packageName=tailscale/tailscale versioning=semver
-ARG TAILSCALE_VERSION=v1.98.3
+ARG TAILSCALE_VERSION=v1.98.5
 
 # Provided automatically by buildx for the target platform.
 ARG TARGETOS
@@ -69,6 +69,12 @@ WORKDIR /src/tailscale
 #                         trusted unix socket, so PermitRead/PermitWrite are
 #                         always false and EVERY CLI call (status, up, set, ...)
 #                         returns "access denied" (tailscale/tailscale#17873).
+#   ipnbus              — IPN bus watch. Without it, 'tailscale up' cannot wait
+#                         for completion: it fires config at the daemon and
+#                         returns immediately ("built with ts_omit_ipnbus; not
+#                         waiting for completion") WITHOUT printing the auth URL
+#                         or confirming success. Including it makes interactive
+#                         'up' behave normally (blocks, prints login URL).
 #
 # Everything else remains omitted, including (rationale):
 #   clientupdate  — DELIBERATELY removed. The built-in updater would download
@@ -111,6 +117,7 @@ RUN mkdir -p /out && \
           -e 's/ts_omit_health,\{0,1\}//g' \
           -e 's/ts_omit_iptables,\{0,1\}//g' \
           -e 's/ts_omit_unixsocketidentity,\{0,1\}//g' \
+          -e 's/ts_omit_ipnbus,\{0,1\}//g' \
           -e 's/,$//' \
     ) && \
     echo "Build tags: ${TAGS}" && \
@@ -150,6 +157,24 @@ RUN mkdir -p /out/usrlocalbin && \
     ln -s /usr/local/bin/tailscale.combined /out/usrlocalbin/tailscale && \
     ln -s /usr/local/bin/tailscale.combined /out/usrlocalbin/tailscaled
 
+# Entrypoint wrapper: enable IP forwarding inside the container's network
+# namespace, then exec tailscaled. tailscaled does NOT reliably enable IPv6
+# forwarding itself in a container netns ("IPv6 forwarding is disabled" warning),
+# which silently breaks advertised IPv6 subnet routes. The sysctls ARE writable
+# from inside a RouterOS container, so we set both here. Written in the builder
+# stage so it ships in the same single /usr/local/bin COPY layer (preserves the
+# overlayfs single-copy property). `exec` keeps tailscaled as PID 1.
+RUN printf '%s\n' \
+      '#!/bin/sh' \
+      '# Enable IPv4/IPv6 forwarding. Required for advertised subnet routes and' \
+      '# exit-node functionality.' \
+      'for f in /proc/sys/net/ipv4/ip_forward /proc/sys/net/ipv6/conf/all/forwarding; do' \
+      '  if [ -w "$f" ]; then echo 1 > "$f" 2>/dev/null || echo "warn: could not write $f"; fi' \
+      'done' \
+      'exec /usr/local/bin/tailscaled "$@"' \
+      > /out/usrlocalbin/entrypoint.sh && \
+    chmod +x /out/usrlocalbin/entrypoint.sh
+
 # =============================================================================
 # Stage 2: Custom minimal busybox
 # =============================================================================
@@ -267,7 +292,9 @@ ENV PATH=/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
 # -----------------------------------------------------------------------------
 VOLUME ["/var/lib/tailscale"]
 
-ENTRYPOINT ["/usr/local/bin/tailscaled"]
+# entrypoint.sh enables IP forwarding (incl. IPv6) in the container netns, then
+# exec's tailscaled with the CMD flags below as its arguments.
+ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]
 
 # Default flags:
 #   --no-logs-no-support  disables logtail uploads (logtail binary code is

docs/DESIGN.md

@@ -70,8 +70,21 @@ in a future release stays omitted until deliberately added to the Dockerfile.
   saves a real ~195 kB of flash (424 kB → 229 kB), not just transfer size.
 
 The final image is built `FROM scratch` — there is no base distro layer.
-It contains only the busybox binary + applet symlinks, the CA bundle, and
+It contains only the busybox binary + applet symlinks, the CA bundle, the
-the Tailscale binary.
+Tailscale binary, and a tiny `entrypoint.sh`.
+
+### Entrypoint: IP forwarding
+
+`ENTRYPOINT` is a small `entrypoint.sh` that enables IPv4 and IPv6 forwarding
+(`net.ipv4.ip_forward`, `net.ipv6.conf.all.forwarding`) in the container's
+network namespace, then `exec`s `tailscaled` (so the daemon stays PID 1). This
+is necessary because `tailscaled` does **not** reliably enable IPv6 forwarding
+itself inside a container netns — it logs "IPv6 forwarding is disabled" and
+advertised IPv6 subnet routes silently fail. The sysctls are writable from
+inside a RouterOS container, so the entrypoint sets them directly; no
+host-side or `/container` configuration is required. The script is created in
+the builder stage so it ships in the same single `/usr/local/bin` `COPY` layer
+(preserving the [single-copy property](#avoiding-overlayfs-layer-duplication)).
 
 ### Avoiding overlayfs layer duplication
 
@@ -143,6 +156,7 @@ that's a separate build, not just a `--platform` change.
 | iptables | Linux iptables support for routing rules |
 | osrouter | Configure kernel network stack and routing tables |
 | unixsocketidentity | **Required** — without it the localapi denies every CLI call with "access denied" ([tailscale#17873](https://github.com/tailscale/tailscale/issues/17873)) |
+| ipnbus | Lets `tailscale up` wait for completion and print the login URL; without it `up` returns immediately without confirming success |
 
 ## Features intentionally omitted
 

docs/USAGE.md

@@ -95,7 +95,8 @@ The daemon is now running but **not yet authenticated**.
 
 ### 5. Authenticate
 
-> This image runs `tailscaled` directly and does **not** bundle Tailscale's
+> This image runs `tailscaled` via a tiny entrypoint (which enables IP
+forwarding, then `exec`s the daemon) and does **not** bundle Tailscale's
 `containerboot` wrapper, so the `TS_AUTHKEY` environment variable is **not**
 read automatically. You authenticate with `tailscale up --authkey=...` after the
 container starts.

renovate.json

@@ -7,6 +7,17 @@
   ],
   "labels": ["dependencies"],
   "rebaseWhen": "behind-base-branch",
+  "customManagers": [
+    {
+      "customType": "regex",
+      "description": "Update version ARGs annotated with a `# renovate:` comment (the dockerfile manager only handles FROM/image lines, not ARG values).",
+      "managerFilePatterns": ["/(^|/)Dockerfile$/"],
+      "matchStrings": [
+        "#\\s*renovate:\\s*datasource=(?<datasource>\\S+)\\s+depName=(?<depName>\\S+)(?:\\s+packageName=(?<packageName>\\S+))?(?:\\s+versioning=(?<versioning>\\S+))?\\s+ARG \\w+=(?<currentValue>\\S+)"
+      ],
+      "matchStringsStrategy": "any"
+    }
+  ],
   "packageRules": [
     {
       "matchManagers": ["dockerfile"],
@@ -16,9 +27,8 @@
     {
       "matchDatasources": ["github-releases"],
       "matchPackageNames": ["tailscale/tailscale"],
-      "description": "TAILSCALE_VERSION ARG: only stable releases. Tailscale uses EVEN minor versions for stable (v1.98.x); ODD minors (v1.99.x) are unstable, so filter to even minors and ignore pre-releases.",
+      "description": "TAILSCALE_VERSION ARG: only stable releases. Tailscale uses EVEN minor versions for stable (v1.98.x); ODD minors (v1.99.x) are unstable, so filter to even minors and ignore pre-releases. The `v` prefix is kept (no extractVersion) so the ARG value stays v-prefixed to match the git tags cloned in the Dockerfile.",
-      "extractVersion": "^v(?<version>\\d+\\.\\d+\\.\\d+)$",
+      "allowedVersions": "/^v\\d+\\.\\d*[02468]\\.\\d+$/",
-      "allowedVersions": "/^\\d+\\.\\d*[02468]\\.\\d+$/",
       "ignoreUnstable": true
     },
     {
@@ -30,8 +40,15 @@
     },
     {
       "matchManagers": ["dockerfile"],
-      "matchPackageNames": ["golang", "alpine", "busybox"],
+      "matchPackageNames": ["golang", "alpine"],
-      "description": "Automerge PATCH-only bumps of build components (Go/Alpine/busybox) once the PR build passes; review minor/major manually.",
+      "description": "Automerge PATCH-only bumps of build components (Go/Alpine) once the PR build passes; review minor/major manually.",
+      "matchUpdateTypes": ["patch"],
+      "automerge": true
+    },
+    {
+      "matchDatasources": ["docker"],
+      "matchPackageNames": ["busybox"],
+      "description": "busybox ARG (custom manager): automerge PATCH bumps once the PR build passes; review minor/major manually.",
       "matchUpdateTypes": ["patch"],
       "automerge": true
     },