Files
LumpiastyandClaude Opus 5.5 2874dcb107 server: disk prompt cache, save slots on shutdown and restore after a restart
llama-swap SIGTERMs a model when the owner switches models (only one large
model fits in RAM), and switching back re-prefills the whole conversation:
about 150 s for a 30k-token chat on the 35B. With --cache-disk-path DIR,
each slot with a prompt is saved to DIR on shutdown. After the restart, a
request whose prompt starts with a saved prompt is restored from the file,
so only the suffix is processed. Off by default.

Save, in server_context::start_loop() after the loop returns:
- disk_cache_collect() copies the state of each slot with >= 256 text tokens
  to host memory (llama_state_seq_get_data_ext, flags NONE) while the device
  buffers still exist. A cold server reads its released state through
  llama_context_restore_memory_host(), with no device use and no extra copy.
- vram_share_exit() then frees the VRAM and releases the GPU token as before,
  so only the D2H copy delays the token release, never the disk IO.
- disk_cache_flush() writes the files. A slot is skipped if its KV does not
  cover its token list (seq_pos_max + 1 != n_tokens: the last batch was not
  decoded) or if the same token list is already on disk.

File (server_prompt_disk_cache, server-task.cpp):
- A 48-byte header (magic, version, key hash, sizes, payload hash), then a
  payload of 8-byte padded sections: tokens, checkpoint table, state, the
  checkpoint states. The hash is FNV-1a over the 64-bit words of the payload.
- Plain fwrite to <name>.tmp, fdatasync, POSIX_FADV_DONTNEED, rename. The read
  is a plain fread plus DONTNEED. There is no mmap: upstream #28092 livelocked
  the kernel on AMD + Vulkan by DMA-ing into a MAP_SHARED file.
- The index is built at startup from the headers. A bad magic, a size that
  does not match the header, or an inconsistent table means the file is
  removed. A hash mismatch at load also removes it, and nothing is restored.
  Other keys and other versions are kept. A .tmp older than 1 h is removed.
- --cache-disk-size N MiB (default 4096, 0 = no limit): before a write, the
  least recently used *.lpcd files of every model in DIR are removed until the
  new file fits; a restore updates the file mtime. Entries the new prompt
  extends are dropped after the write and do not count against the limit.
  A write also needs its size + 1 GiB free on the file system. A write error
  or a full disk is logged; the file is not saved and the exit stays clean.

Key: the build commit, the model path + size + mtime, LoRA and control
vectors, n_ctx, n_ctx_seq, n_seq_max, n_ubatch, kv_unified, swa_full, the
K/V types, the flash-attn type, and the RoPE/YaRN parameters.

Restore, in get_available_slot() after the RAM cache:
- Only while warm (holding the GPU token), with cache_prompt on and no media
  tokens. The file must reuse at least 256 more tokens than the slot holds.
- Reusable means one of two things. Either the saved token list is an exact
  prefix of the new prompt, or (for a recurrent/SWA model) a saved checkpoint
  at or below the common prefix can be used. A plain-KV model can be cut back
  to any prefix. Exact prefix alone is not enough for OpenWebUI on Qwen: the
  template rewrites the previous assistant turn (the reasoning is dropped), so
  the saved list is almost never a prefix of the next turn. The checkpoints
  are exact snapshots, and update_slots() rolls back to one exactly as it does
  for the RAM cache. They are restored with id_task -1, so one that fails to
  load means a re-prefill, not an abort.
- The slot's current prompt goes to the RAM cache first. A set_data failure
  clears the slot and removes the file.

Not supported with speculative decoding (warning, disabled): the draft state
is not saved. Only the slots are saved, not the RAM cache entries.

Measured on the pod, CPU only, Qwen3.5-0.8B (hybrid, 6 of 24 layers attention):
- 573-token chat: 64.5 MiB file with 2 checkpoints, copy 18 ms, write 171 ms,
  exit 314 ms (125 ms without the cache). After the restart: read 166 ms,
  restore 3 ms, turn 2 prompt_n 58 of 596 in 462 ms against a 2913 ms full
  prefill. The answer is identical to a server that never restarted.
- 12k tokens: 200.7 MiB, copy 110 ms, write 350 ms, exit 641 ms, peak RSS
  +162 MiB during the exit save. After the restart: read 307 ms, restore 18 ms,
  turn 2 prompt_n 35 of 12188 in 1.2 s against a 72 s prefill.
- The /root PVC writes at about 0.66 GB/s with fdatasync. /tmp (the node
  overlay) stalled once: 5.8 s for 64.5 MiB.
llama-swap v239 waits for the old process to exit before it starts the next
model, and SIGKILLs a process that is still there after 30 s. So the exit
save adds to the model switch time: about 1 s per GB on the PVC.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:55:57 +01:00
..