* Make ggml_gated_delta_net take only the initial recurrent state (D, 1, n_seqs) and passes the snapshot count K as an op parameter instead of inferring it from state->ne[1].
Remove the padding hack and copy all emitted snapshots into the recurrent cache with a single strided ggml_cpy
* Make GDN changes in all backends. Address review comments.
* Fix CI build errors
* cpu: add GGML_OP_COL2IM_1D
Add the overlap-add (scatter-add) step of a 1D transposed convolution.
A ConvTranspose1d factorizes as a GEMM followed by col2im: a weight
pre-permuted to [IC, K*OC] is contracted against the [IC, T_in] input
with mul_mat to produce a column matrix [K*OC, T_in], and col2im_1d
scatters those columns back into the [T_out, OC] signal, with
T_out = (T_in - 1)*s0 + K - 2*p0.
Keeping the contraction as a plain mul_mat leaves the heavy work on the
optimized (and quantizable) matmul kernels, so col2im_1d only does the
cheap overlap-add.
CPU uses a gather formulation parallelized over output channels,
supporting F32, F16 and BF16 with an F32 accumulator.
* tests: add backend coverage for GGML_OP_COL2IM_1D
Add test_col2im_1d next to the conv_transpose_1d cases, covering F32,
F16 and BF16 across eight geometries: the canonical kernel = 2*stride
DAC upsampling shape, overlap, no overlap, cropping (p0 = 1 and
p0 = stride/2), kernel < stride with zeroed gaps, kernel not a
multiple of stride, and a single column unfold.
Perf mode gets three real vocoder stage shapes reporting memory
bandwidth. max_nmse_err relaxes to 5e-4 for F16 and BF16.
* cpu: harden GGML_OP_COL2IM_1D
ggml_col2im_1d validates s0, oc, p0 and input contiguity at graph
build time, before the oc division, protecting every backend at once.
The kernel asserts the contiguity its flat indexing assumes and its
doc states the full output length including the crop term.
The kernel parallelizes over the time axis: the split stays balanced
down to OC = 1, where the previous channel split was single threaded.
Values are bit identical on the three real vocoder chains, two out of
three improve.
* tests: extend the GGML_OP_COL2IM_1D grid
The eval grid grows to eleven geometries: OC = 1 (mono output stage),
K = 1 with stride > 1 (sparse scatter, every gap position zeroed) and
a crop down to T_out = 2 where all the gather bounds act at once.
* tests: add col2im_1d equivalence test
tests/test-col2im-1d.cpp proves mul_mat + col2im_1d matches the
native ggml_conv_transpose_1d on the CPU backend, F32 bit exact, F16
and BF16 through casts of the column matrix. test-backend-ops cannot
cover this for a CPU only op since the CPU backend is its own
reference there.
* rpc: bump protocol patch version for GGML_OP_COL2IM_1D
GGML_OP_COUNT goes from 96 to 97 with the new op, which trips the
static_assert in ggml-rpc.h. Bump RPC_PROTO_PATCH_VERSION since the
op is appended and no existing op code shifts.
* spec: support MTP
* fix batch size
* rename files
* cont : simplify (#7)
* MTP: clean-up (#9)
* MTP: clean-up
* review: use llama_context_type instead of llama_graph_type
* review: remove llama_model_has_mtp
* review: fix convert issues
* convert: fix pycheck
* review: formatting
* use `mtp-` for identifying mtp models
* convert: fix mtp conversion
* mtp -> draft-mtp
* remove unused llama_arch
* add need_embd in speculative
* llama: allow partial seq_rm for GDN models for speculative decoding
Currently speculative checkpoint needs to restart from a checkpoint
after some draft tokens are not accepted, this leads to some wastage in
running the target again. This PR adds the ability to rollback upto
`draft_max` by storing the GDN intermediates.
* fix pending state
* vulkan: add GDN partial rollback
* meta: extend check to axis 1
* metal: add GDN partial rollback
Extend the gated delta net kernel to store intermediate states for
partial rollback support on the Metal backend.
- Add K (snapshot slot count) as a function constant
- Read input state from slot 0 of the 3D state tensor
- Write intermediate states to different slots during token loop
- For K=1, maintain backward-compatible single-slot behavior
Ref: https://github.com/ggml-org/llama.cpp/commit/8c05923630110223669f069af2000e9cf10c02bc
Assisted-by: llama.cpp:local pi
* delta_net_base: use ggml_pad instead of new_tensor
* review: add need_rs_seq
* review: rename part_bounded to n_rs
* review: deslop comments
* review: rename, add asserts
* server : adjust checkpoint logic (#11)
* server : adjust checkpoint logic
* cont : rm asserts
* server-context: fix early exit
* spec : fix compatibility with n-gram and add TODOs (#13)
* metal : cleanup
* llama : fix faulty bitwise check in recurrent memory
* server : disable RS-based MTP in combination with other spec types
* spec : add TODOs
* cont : fix comment
* cont : update comment
* common : fix logic for ngram + mtp compat
* llama-memory: enable checkpointing with partial rollback
* cont: add test-case for loading into a dirty ctx
* llama-memory-recurrent: clear rs_idx in clear
* download: fix mtp path
* llama-arch: fix enorm op
* docs: update docs
* conversion: fix type annotations
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Refactor CUDA 2D transpose implementation to support multiple kernel types and improve parameter handling
- Introduced a `conv2d_transpose_params` struct for better parameter management.
- Updated `conv2d_transpose_kernel` to be templated for different kernel types (float and half).
- Modified `ggml_cuda_conv_2d_transpose_p0` to handle both F16 and F32 kernel types.
- Enhanced test cases to validate functionality for both kernel types.
* Refactor test cases for 2D convolution transpose to support dynamic kernel types
- Updated `test_conv_transpose_2d` structure to improve parameter handling by reordering constructor arguments.
- Enhanced test case generation to iterate over kernel types, allowing for flexible testing of different configurations.
- Removed hardcoded kernel type instances in favor of a loop for better maintainability and scalability.
* Refactor ggml_compute_forward_conv_transpose_2d to support both F16 and F32 tensor types.
* Refactor conv2d transpose kernel to use a template for kernel type, enhancing flexibility for different data types.
Update test cases to include both F16 and F32 tensor types for comprehensive coverage.
* Update ggml/src/ggml-cuda/conv2d-transpose.cu
Co-authored-by: Aman Gupta <amangupta052@gmail.com>
* Update ggml/src/ggml-cpu/ggml-cpu.c
Co-authored-by: Aman Gupta <amangupta052@gmail.com>
* Refactor conv2d transpose implementation by removing the conv2d_transpose_params struct and dispatching with direct kernel launch.
* Enhance cpu conv2d transpose implementation by introducing a templated kernel type for improved flexibility with F16 and F32 data types.
---------
Co-authored-by: Aman Gupta <amangupta052@gmail.com>
* ggml : transpose fused GDN state access for coalesced memory reads (#20436)
The fused Gated Delta Net kernel accessed the [S_v, S_v] state matrix
column-wise on row-major storage, causing strided reads (stride S_v =
128 floats = 512 bytes) that waste GPU cache bandwidth. This produced a
39% regression on Qwen3.5-9B (Metal, M4 Max) compared to the unfused
path.
Transpose the state indexing so threads read contiguously:
- Metal: s_ptr[is*S_v] -> s_ptr[is] (stride 1 vs S_v)
- CUDA: curr_state[i*S_v+col] -> curr_state[col*S_v+i] (coalesced)
- CPU: restructured loops for row-wise transposed access
Also add --fused-gdn [on|off|auto] CLI flag (mirrors --flash-attn) so
users can control fused GDN independently of auto-detection.
All GATED_DELTA_NET backend-ops tests pass.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* ggml : use SIMD dot products in CPU GDN kernel, couple AR/chunked fused flags
- Replace scalar inner loops with ggml_vec_dot_f32 for SIMD-optimized
dot products in the CPU fused GDN kernel (delta and attention output)
- Couple fused_gdn_ar and fused_gdn_ch flags in auto-detection: if one
path lacks device support, disable both to prevent state layout mismatch
between transposed (fused) and non-transposed (unfused) formats
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* llama : rever fgdn argument changes
* graph : remove GDN state transposes
* vulkan : adapt
* cuda : remove obsolete smem code
---------
Co-authored-by: Paul Flynn <paul@arkavo.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Oliver Simons <osimons@nvidia.com>
* llama : enable chunked fused GDN path
* models : avoid Q and K repeats when using fused GDA
* cont : fix comment
Co-authored-by: Aman Gupta <amangupta052@gmail.com>
* cont : fix the fix
Co-authored-by: Aman Gupta <amangupta052@gmail.com>
* cont : fix
* metal : add GDN kernel (#20361)
* metal : add Metal backend for GGML_OP_GATED_DELTA_NET
Add a fused Metal kernel for the gated delta net recurrence op
(#19504), enabling GPU-accelerated inference for DeltaNet-based
models (Qwen3.5, etc.) on Apple Silicon.
Supports both GDA (scalar gate) and KDA (per-row gate) modes
with head_size 64 and 128. Unsupported configurations (head_size
32, non-contiguous tensors) gracefully fall back to CPU.
Performance: Qwen3.5-0.8B Q4_K_M on M4 Max
tg128: 170 -> 213 t/s (+25%)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* metal : validate contiguity of all input tensors in supports_op
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* metal : add algorithm equivalence comment for GDA decay path
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* cont : unslop + optimize
* cont : clean-up
---------
Co-authored-by: Paul Flynn <paul@arkavo.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* CUDA: AR gated delta net improvements (#20391)
* Add FastDiv to gated_delta_net_cuda
* Shard columns across warps
This reduces register pressure (avoids spill for S_v = 128) and gives
the warp-scheduler more CTAs to schedule (thus hiding data-access
latencies).
* Remove unneded include in gated_delta_net.cu
* Improve comments
* Apply code-formating
* Make sharding HIP-compatible
1. Use ggml_cuda_get_physical_warp_size() to determine warp size flexibly
2. Add test with partial warp to test sum reduction on CUDA
* Remove fastdiv_s64, as we can treat neqk1 and rq3 as uint32_t
* Rename variables
* Enable GDN also for prefill, move TODO for chunked_GDN
* Actually remove the TODO from 206890897546bd16602c3b79394fd5ea09ef199f
* Get warp size at runtime
warp_size is not known at compile time in hip host code.
* Don't expose ggml_cuda_get_physical_warp_size on host
---------
Co-authored-by: uvos <devnull@uvos.xyz>
* llama : refactor llm_build_delta_net_base API
---------
Co-authored-by: Aman Gupta <amangupta052@gmail.com>
Co-authored-by: Paul Flynn <paul@arkavo.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Oliver Simons <osimons@nvidia.com>
Co-authored-by: uvos <devnull@uvos.xyz>
* WIP: add NVFP4 quantization support
* tests
* improve NVFP4 dot product implementation performance and fix bad super call
* typo
* Use nvfp4 kvalues
* vulkan : fix NVFP4 shader compilation by including kvalues_mxfp4 lookup table
* vulcal and perf fixes
* wip
* Fix metal
* fix vulcan
* Rename threshold & fix wrong scale
* Fix MOE
* Shelf backend implementations (CUDA, Metal, Vulkan, arch-specific SIMD)
Remove NVFP4 support from GPU backends and architecture-specific
optimized dot products. These should be added in separate PRs so
backend specialists can review them independently.
Reverted files:
- ggml-cuda: common.cuh, convert.cu, mmq.cu/cuh, mmvq.cu, vecdotq.cuh,
quantize.cu/cuh, mma.cuh, ggml-cuda.cu, fattn-tile.cuh
- ggml-metal: ggml-metal.metal, ggml-metal-device.cpp, ggml-metal-impl.h,
ggml-metal-ops.cpp
- ggml-vulkan: ggml-vulkan.cpp, all vulkan-shaders/*
- ggml-cpu arch: arm/quants.c, x86/quants.c, powerpc/quants.c, s390/quants.c
Core NVFP4 support (type definition, CPU fallback dot product,
quantization, dequantization, conversion) is retained.
* Fix arch-fallback.h: add NVFP4 generic fallback for all platforms
After shelving backend-specific SIMD implementations, the generic
CPU dot product needs to be aliased on ARM, x86, PowerPC, and s390
platforms that previously relied on arch-specific versions.
* quantize: add NVFP4 as a quantization type option
* Fix ggml_fp32_to_ue4m3: handle subnormal values
Previously, values with ue4m3_exp <= 0 were clamped to 0, causing
all small scales to underflow. This made NVFP4 quantization via
llama-quantize produce garbage (PPL = 5.8M) since typical transformer
weights have amax/6.0 in the range 0.001-0.01, which falls in the
UE4M3 subnormal range.
Now subnormals are properly encoded as man * 2^-9 (exp=0, man=1..7),
matching the decode path in ggml_ue4m3_to_fp32.
Result: NVFP4 requantization now produces PPL = 15.25 (vs F16 = 14.33),
comparable to Q4_1 (PPL = 15.81) at slightly lower BPW (4.70 vs 5.15).
* Restore ARM NEON NVFP4 dot product implementation
Restores the optimized ggml_vec_dot_nvfp4_q8_0 for ARM NEON using
vqtbl1q_s8 lookup and ggml_vdotq_s32 dot products.
tg128 performance: 4.37 t/s (generic) -> 13.66 t/s (NEON) = 3.1x speedup
* Optimize ARM NEON NVFP4 dot product: LUT + vpaddq + vfmaq
- Add ue4m3_scale_lut[128] to ggml-common.h replacing branch-heavy
ggml_ue4m3_to_fp32() in the hot loop
- Use vpaddq_s32 for pairwise int32 reduction instead of vaddvq_s32
- Accumulate with vfmaq_f32 into float32x4_t vector accumulators
tg128: 8.1 -> 31.0 t/s (3.8x speedup, 77% of Q4_1 speed)
* ARM NEON NVFP4: rearrange q8 to match nibble layout
Alternative approach: rearrange q8 data to match the NVFP4 lo/hi
nibble layout instead of rearranging the looked-up NVFP4 values.
Eliminates vcombine_s8(vget_low, vget_low) shuffles.
Performance is equivalent (~18.5 t/s) - the bottleneck is the 2x
block overhead from QK=16 vs QK=32, not the shuffle instructions.
* CPU only backend 64 super-block layout
* cleanup
* Remove unused LUT
* int
* exclude NVFP4 from unsupported ops in metal build
* remove quantization for now
* store scales as native UE4M3, preserve original model bits when possible
* Update convert_hf_to_gguf.py
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* correct comment
* format
* reduce duplication and cleanup
* Address comments
* move detection to prepare_tensors
* Use math instead of const
* Move
* fix comment
* Shelf quantize tests
* Rebase and move check
* cleanup
* lint
* Update gguf-py/gguf/scripts/gguf_convert_endian.py
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Use fallback quant config
* Simplify
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* organize
* Refactor
* Update convert_hf_to_gguf.py
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Update convert_hf_to_gguf.py
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Update convert_hf_to_gguf.py
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* add quantize_nvfp4 (required for test_quants.py)
* add quantize_nvfp4 (required for test_quants.py)
* add quantize_nvfp4 (required for test_quants.py)
* fix return type
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* ggml-cpu: FA add GEMM microkernel
* add guard for sizeless vector types
* fix case where DV % GGML_F32_EPR !=0
* move memset out of the loop
* move another memset out of the loop
* use RM=4 for arm
* simd_gemm: convert everything to int
* convert everything to size_t to avoid warnings
* fixup
* add pragma for ignoring aggressive loop optimizations
* ggml-cpu: Use tiled FA for prompt-processing
the FA performance is gimped on CPU on long contexts because it essentially uses a vector kernel. This PR adds a tiled FA for PP. Perf tuning for tile sizes done on a AMD EPYC single-socket 64-c machine.
* fix out of bounds for mask
* skip rows where there are all masks
* skip tile if mask is inf
* store mask in worksize
* check inf tile earlier
* Feat: Added vulkan circular tiling support
* Feat: Added cpu circular
* Feat: Added cuda kernels
* Added tests
* Added tests
* Removed non-pad operations
* Removed unneded changes
* removed backend non pad tests
* Update test-backend-ops.cpp
* Fixed comment on pad test
* removed trailing whitespace
* Removed unneded test in test-backend-ops
* Removed removed test from calls
* Update ggml/src/ggml-vulkan/vulkan-shaders/pad.comp
Co-authored-by: Ruben Ortlam <picard12@live.de>
* Fixed alignment
* Formatting
Co-authored-by: Aman Gupta <amangupta052@gmail.com>
* Format pad
* Format
* Clang format
* format
* format
* don't change so much stuff
* clang format and update to bool
* fix duplicates
* don't need to fix the padding
* make circular bool
* duplicate again
* rename vulkan to wrap around
* Don't need indent
* moved to const expr
* removed unneded extra line break
* More readable method calls
* Minor wording changes
* Added final newline
* Update ggml/include/ggml.h
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Update ggml/include/ggml.h
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Added circular pad ext tests
* Gate non circular pad devices
* Cleaned gating of non-circular pad devices
---------
Co-authored-by: Phylliida <phylliidadev@gmail.com>
Co-authored-by: Ruben Ortlam <picard12@live.de>
Co-authored-by: Aman Gupta <amangupta052@gmail.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Adjust to pytorch
* Add antialiasing upscale
* Increase number of patches to 1024
* Handle default marker insertion for LFM2
* Switch to flag
* Reformat
* Cuda implementation of antialias kernel
* Change placement in ops.cpp
* consistent float literals
* Pad only for LFM2
* Address PR feedback
* Rollback default marker placement changes
* Fallback to CPU implementation for antialias implementation of upscale
* Qwen3 Next - cleaned up version
* Whitespaces and stuff
* Correct minor errors
* Update src/llama-model.cpp
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Misc. fixes.
* Clean up code, add missing hybrid qualifier
* Did someone transpose the SOLVE_TRI result matrix? Perhaps...
* Whitespace
* Proper tensors for cb calls
* Use llama-graph.h vertical alignment
* BROKEN: chunking
* Set new tensors as inputs.
* Proper chunk logic
* It's the circle of life...
* More shenanigans for n_seq > 1
* Nail in the coffin?
* Fix Windows build
* Eh, one fails on Windows, the other fails on Mac... just use general capture.
* quant : cleanup
* model : cleanup
* qwen3 : cleanup
* cont : cleanup
* cont : cleanup
* ggml : revert change
* qwen3 : cleanup
* cont : cleanup
* Readd cmath
* qwen3 : fix typo
* Update convert_hf_to_gguf.py
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Usual suspects
* fix my bad suggestion
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* extract rotate_pairs logic from ggml_compute_forward_rope_f32
* templateify ggml_compute_forward_rope_f32 and _f16
* abort when rope type not supported, remove GLM from test-rope
* add imrope branch to switch
* add rope tests for perf
* Update ggml/src/ggml-cpu/ops.cpp
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Update ggml/src/ggml-cpu/ops.cpp
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Fix test-conv2d-dw failure on ARM SVE by using runtime vector length
The ggml_compute_forward_conv_2d_dw_cwhn function was using a hardcoded GGML_F32_EPR (8) for SIMD vectorization, but on ARM SVE the actual vector length varies by hardware. This caused incorrect computation when processing CWHN layout tensors on ARM machines.
Fix by using svcntw() to get the runtime SVE vector length instead of the compile-time constant.
Co-authored-by: ggerganov <1991296+ggerganov@users.noreply.github.com>
* ci : reduce sam score threshold
* ci : update bbox checks for sam test
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: ggerganov <1991296+ggerganov@users.noreply.github.com>
* ggml : fix interpolate with align-corners and ne=1
* avoid division by zero if one of the spatial dimensions is 1
* cpu, cuda, opencl returned correct result anyway due to clamp
* vulkan didn't clamp for align-corners so results were broken
* fix clang warning
* CPU: Add support for FLOOR,CEIL,ROUND and TRUNC unary operators
- Added the operators to unary op enum
- Implemented API functions
- Implemented forward and unary-op logic in CPU backend
- Updated ggml_get_n_tasks
- Updated operators names array and static_assert
- Updated docs and enabled automatic tests
* docs: add documentation for ggml_trunc and ggml_trunc_inplace in ggml.h
* chore: remove trailing whitespace from ggml.h
* Remove unresolved merge markers
* Apply review suggestions: cleanup formatting, enum order and leftover artifacts
* Regenerate ops.md using create_ops_docs.py
* tests : add -INF blocks to the KQ mask in the FA tests
* cont : bump -INF block size to 64
Co-authored-by: Jeff Bolz <jbolz@nvidia.com>
* ggml : prevent division by zero in FA CPU op
---------
Co-authored-by: Jeff Bolz <jbolz@nvidia.com>
* First attempt
* No permute during convert (fixes qk tensors), proper norm application.
* RoPE = NeoX
* Coherence!
* Migrate xielu params from tensors to hyperparameters
* Simple CUDA kernel
* Revert stupid LLM refactorings
* Chat template support
* configchecker / flake8 errors
* Reorder unary.cu
* I do conclude that LLMs are, in fact, stupid.
* Fix after merge
* Final newline
* Make xIELU an UNARY_OP
* Final newline
* Correctly account for parameter shift
* Argh.
* Update ggml/src/ggml-cpu/unary-ops.cpp
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Refactor: remove unused methods, inline and factorize softplus, add const modifiers
* Revert CUDA changes, implement xIELU as a separate OP
* Pesky newline
* Add float2half / half2float for F16 inputs/outputs
* CUDA variants, attempt 2
* Actually, attempt 3
* Update ggml/src/ggml-cuda/unary.cu
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
* Missing convert header
* Proper formula and reference for xIELU in the comments.
* Modify unary-ops.cpp to add the functor-based logic besides the template system to retain optimizations
* Apply suggestions from code review
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Add tensor mappings for Apertus to global list instead
* Fix lazy on scalars
* Update ggml/src/ggml-cuda/unary.cu
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
* Add comment about the constraints on positive/negative alpha
* Change `softplus` to `ggml_softplus`
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* implement set_rows with i32 index
* template fix
* test quantized path
warnings--
* Apply suggestions from code review
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* forgotten name change
* deduplicate cuda/sycl and test-fix
* indent++
* vulkan: support set_rows with i32 index type (#16162)
* disable i32 index for webgpu for now
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
Co-authored-by: Jeff Bolz <jbolz@nvidia.com>
* ggml : remove adding extra dim timestep embedding
This commit updates the ggml_timestep_embedding function to no longer
add an extra dimension when the specified dimension is odd.
The motivation for this change is that this introduces an unnecessary
dimension when the dimension is odd, which caused an issue in the
kernels which were not expecting this extra dimension and it resulted in
uninitialized memory for the second to last dimension.
* ggml-cuda : fix padding in timestep embedding kernel
This commit removes the zeroing out of the last dimension now that we
are not adding the extra padding dimension.
* ggml-metal : fix padding in timestep embedding kernel
This commit fixes the zero padding for odd dimensions in
the timestep embedding kernel
* ggml-opencl : fix padding in timestep embedding kernel
This commit fixes the zero padding for odd dimensions in
the timestep embedding kernel.
* ggml-sycl : fix padding in timestep embedding kernel
This commit fixes the zero padding for odd dimensions in
the timestep embedding kernel.
* ggml-vulkan : fix padding in timestep embedding kernel
This commit fixes the zero padding for odd dimensions in
the timestep embedding kernel.
* ggml-cpu : fix padding in timestep embedding function
This commit removes the zeroing out of the last dimension now that we
are not adding the extra padding dimension.
