* hexagon: initial support for LIGHTNING_INDEXER op
* hex-lght-idxr: hmx for prefill
* hex-lght-idxr: q8_0 decode gather transpose, two-block decode compute
* hex-lght-idxr: pipelined hmx path for decode and prefill
* hex-lid: add support for K (f32)
* hex-lid: add support for K (f32)
* hex-lid: add support for q4_0
* hex-lid: remove scalar VTCM reads in the HMX q4_0 K prep and remove vector spills
* hex-lid: host/kernel kparams alighnment and remove sw devices in kernel
* hex-lit: update dma pipeline to use canonical dbl buffering in all paths
* hex-lit: add GGML_HEXAGON_LI_SELECT to force hmx/hvx paths
* hex-lit: add support for dims collapse
* hex-lit: make kparams constistent with other ops
---------
Co-authored-by: Max Krasnyansky <maxk@qti.qualcomm.com>
* hexagon: add support for DSV4_HC_PRE
* hexagon: hsv4-hc-pre plain/gated split kernel and l2 prefetch optimization
* hex-dsv4-hc-pre: double-buffered DMA for prefill
* hex-dsv4-hc-pre: refactor DMA block setup
* hex-dsv4-hc-pre: precompute kernel params
* hex-dsv4-hc-pre: support for n_hc != 4
* hexagon: add support for DSV4_HC_POST
* hex-dsv4-hc-pre: refactor gated PRE prefill DMA to dst writeback after each block
* hex-dsv4-hc-pre: remove in-loop vector spills and redundant device-side checks
* hex-run: add support for test-llama-archs tool
* hex-dsv4: refactoring and optimizations
Remove non-dma paths.
Clean up DMA pipelines and dma_addr_t casts.
Add dims collapsing support.
Tested with test-llama-archs -a qwen4ext and test-backend-ops
---------
Co-authored-by: Max Krasnyansky <maxk@qti.qualcomm.com>
* hex-tools: support for --compare option in the profile.py
* hex-unary: improve collapse logic to also do splits if nrows is small
* hex-colapse: handle all colapsing at the host and make it generic
* hex-colapse: remove leftover unary helper
* hex-build: bump toolchain, enable v85
* hex-build: bump toolchain to v0.8 in the CI and build scripts
* hex-build: add a little python script for swiv needed on some iot devices
* hex-build: fix flake8 warnings
* hex-arch: update version cap to v85
* hex-inspect: flexible TOOLS_ROOT
* hex-build: update to snake_case naming
* hex-build: update leftover old toolchain refs
* hex-target: update build and run scripts to support ubuntu with adb transport
* init
* wip
* wire it up
* make it clear that it's experimental
* add props.connect_code
* nits
* fix windows build
* server: do not advertise a connect code without the tunnel
--connect-code on its own had no effect other than being served in
/props, so the Web UI showed a remote access code that no tunnel was
serving. Clear it when --connect is off, and say so once at startup.
The teardown comment claimed that terminate() closes the child stdout.
It does not: the log thread leaves fgets() only once every writer of
that pipe is gone, so a descendant of llama-connect would block the
join forever. Describe the real contract instead.
Also restore the --reasoning-preserve default in the generated docs.
* Update tools/connect/CMakeLists.txt
Co-authored-by: Adrien Gallouët <angt@huggingface.co>
* server: dial llama-connect on the bound port and a reachable host
Pass ctx_http.port so --port 0 and the GCP override work, pick the
dial host from --host (wildcards map to loopback, IPv6 is bracketed)
and refuse --connect when only unix sockets are bound.
---------
Co-authored-by: Pascal <admin@serveurperso.com>
Co-authored-by: Adrien Gallouët <angt@huggingface.co>
.pi/gg/SYSTEM.md repeated the full agent ruleset. Move it to .pi/gg/APPEND_SYSTEM.md and keep only the llama.cpp-specific rules, so it can be appended to a main system prompt with --append-system-prompt.
Drop the .pi/SYSTEM.md symlink setup from wc2wt.sh and pr2wt.sh. Worktrees no longer need it now that the folder holds an addendum instead of a full prompt.
Assisted-by: pi:llama.cpp/ggml-org/Qwen3.8-Flash-Next-GGUF (RTX 5090 32GB, DDR5 128GB)
* hex-repack: Remove need_repack hack and streamline the rules -- breaks GET_ROWS tests for K-Quants, will fix in the next round
Add support for GET_ROWS with tiled Q5_K
Add support for raw k-quant tensors
* hex-get-rows: vectorize raw k-quant ukernels
* hex-binary: refactor dma-loop thread functions (no need for macros, etc)
* hex-quant: move/cleanup flat and tiled dequant ukernels
* hex-repack: add support for repacking/tiling F16/F32/BF16 2D weights
* hex-get-rows: remove redundant cast
* hex-repack: proper filtering for BF16 that were leaking through during the tests
* hex-repack: streamling tiling rules (broken MM for now)
* hex-repack: fix mmid after tiling updates
* hex-repack: rename repacked to tiled in all flags/funcs/kernels/vars
* hex-mm: fix valid_rows calc in various kernels
* hex-mm: remove unused hvx_mm_nx_2d_flat
* hex-mm: cleanup and optimize hvx-tiled vec_dot_f16
* hex-mm: another pass at hvx-tiled f16 matmul
* hex-get-rows: optimize small src1
* hex-get-rows: one more pass at recovering get-rows perf regression
* hex-repack: export GGML_HEXAGON_RT_REPACK via run.py
* hex-mm-tiled: fix accuracy regression with hmx-tiled-f16 matmul
* hex-mm: fold tiled_f16 checks into the general flow
* hex-get-rows: remove dead checks for buffer_is_hexagon and tiling during supports_op
* hex-quant: proper tail handling in new dequant ukernels
* hex-get-rows: remove unused code and cleanup support checks
* hex-mm: cleanup ne1 padding/tiling checks
* hex-mm: cleanup fusion checks for tiled tensors
* hex-repack: add a little can_repack helper to reduce duplication
* hex-repack: never repack host buffers
* hex-repack: factor out repack functions into separate .h and .cpp
* hex-tensor: cleanup tensor ifaces for tiled/padded sizes
* hex-repack: update k-quant tiling comments and cleanup #defines
* hex-dcache: factor out l2/dcache dirty tracking and flushing
* hex-tensor: update docs and remove #defs duplication
* hex-tensor: remove unused/incorrect get_data interface
* hex-get-rows: cleanup vtcm layout build
* tests: disable huge MM tests
* hex-dcache: add missing header
Small helper around the GitHub Actions API: lists the workflow runs that are not
finished yet (in_progress, queued, pending, waiting, requested), grouped by status.
Supports selecting runs by status, by branch (server-side, to reduce API traffic)
or by a regex on the branch name, and can cancel the selected runs via --kill.
Assisted-by: pi:llama.cpp/Qwen3.8-Flash-Next
* unicode : add opt-in NFC normalization for Unigram tokenizers
Note: used help from Codex, Sol 6.1 Medium
* Fixing initial bot comments + linter error (using existing out instead of print)
* removed test_nfc_tokenizer
* hexagon: add configurable HTP DCVS/HMX power mode
* hexagon: address PR review feedback (drop CLI flag, align QAIRT power modes, comment/log cleanup)
* hexagon: add --hex-power-mode flag to run.py
Hooks GGML_HEXAGON_POWER_MODE into the unified run.py runner, following
the existing --hex-nhvx pattern. The env var must be set before the
process touches the Hexagon backend registry (see comment in
ggml_hexagon_init), so this is exposed as a runner flag rather than a
common/arg.cpp CLI option.
* hexagon: keep HTP awake for DCVS power profiles
* Apply suggestion from @max-krasnyansky
---------
Co-authored-by: Max Krasnyansky <maxk@qti.qualcomm.com>
* hexagon: move the converting CPY in blocks of rows per DMA descriptor so short rows are not DMA-latency bound
* hex-cpy: cleanup cpy cursor handling
* hex-cpy-concat: introduce threaded dma/hvx gather-row helper
Co-authored-by: Ruslan Karymov <67752306+karusrus@users.noreply.github.com>
* hex-cpy: remove leftover rejections for extended buffers
* hex-cpy: relax the gate for fast-path
* hex-cpy: remove scalar divs and vtcm access and use explicit gather_sync
* hex-cpy: add proper support for mdev work splitting to fastpath
* hex-cpy: optimize dense gather-row tasks
* hex-cpy: unroll gather-rows loops
* hex-cpy: add fastpath for f16
* hex-cpy-concat: support for colapsing 3/4D dims
* hex-cpy: double-buffer support
* hex-cpy: factor out gather-rows into more of an op by itself
* hex-cpy-concat: dedup kernel-params
* hex-cpy-concat: step-down nr to fit instead of hard fail
* hex-gather: replace div with a mask
* hex-gather-rows: cleanup dma pipeline and remove the stalls
* hex-gather: specialize compute funcs
* hex-gather: reduce scalar reg.spills and func calls
* hex-gather: do not recompute rows-per-thread on the npu
* hex-build: add support for building/installing just hexagon
* hex-cpy-concat: remove redundant barrier in concat and move cpy barrier under fence
* hex-gather: annotations for dma-out
* hex-mdev: make all key vtcm_acquire sync state atomic (fixes random hangs in mdev setups)
---------
Co-authored-by: Yiwei Shao <yiwei@aizip.ai>
Co-authored-by: Ruslan Karymov <67752306+karusrus@users.noreply.github.com>
* hex-bufs: add support for alloc_buffer_n
* hex-bufs: add support for splitting large tensors into separate buffers
* hex-bufs: update GGML_HEXAGON_MBUF to accept three values dyn,static,total
* hex-bufs: bump dyn. default to 512MB since 128MB causes perf regressions with big MOEs
* hex-run: add --no-embd-offload option to simplify command lines on devices that need it
* Update scripts/snapdragon/run.py
Co-authored-by: Jhen-Jie Hong <iainst0409@gmail.com>
---------
Co-authored-by: Jhen-Jie Hong <iainst0409@gmail.com>
* hexagon: head-parallel flash_attn partitioning for row-split multicore
In row-split mode each core computes its output row shard of every
MUL_MAT, but flash_attn was previously partitioning by Q tokens
(flat qrow split) instead of by heads. This forced every core to
read the full KV cache (all n_kv_heads), negating the memory
bandwidth benefit of multicore on flash_attn.
Change both HMX and HVX flash_attn kernels to partition by KV heads
when n_kv_heads is divisible by n_cores: core i processes heads
[i*n_kv_heads/N, (i+1)*n_kv_heads/N) exclusively, reading only its
head shard of the KV cache. Falls back to the original token-block
split when n_kv_heads % n_cores != 0 (e.g. Gemma-4 with 2 KV heads
on 4 cores).
Controlled by GGML_HEXAGON_FA_HEAD_SPLIT (default 1 = on).
The flag is packed into bit 1 of the existing is_dst_fp32 kparams
byte to stay within the 128-byte kernel_params blob limit.
Measured gains at 4c row-split (PP t/s, ubatch=1024):
Qwen3-0.6B: 6977 -> 11026 (+58%)
llama-3.2-3B: 3717 -> 5522 (+49%)
Qwen3.5-4B: 2739 -> 2855 (+4%)
Gemma-4 MoE: no change (MoE FFN dominates, fallback path)
TG is unchanged (flash_attn is a small fraction of decode time
relative to the matmul+barrier cost per layer).
* hex-fa: cleanup kern_params and head-split selection
* hex-fa: add -fa-head-split option to run.py
* hex-mdev: update matmul solver to account for reduced work in row-split scenarios
* hex-mmid: better work splitting by expers in multi-dev scenarios
* hex-fa: update HMX gating based on the model/n-hvx/ctx-len sweep
* hex-fa: precompute softcap/scale on the host
* hexagon: flatten matmul into 2d to use HMX in multi-sequence
* hex-mm: cleanup kparams and use collapse to 3/4D -> 2D mapping
* hex-mm: fix typo in collapse fallback
* hex-mm: another pass at consistent naming for act tensors
* hex-mm: add support for colapsing dims in fused matmuls
* hex-build: fix WoS build errors
* hex-mm: make sure to enforce dst stride in can_collapse
* hex-fa: add a onliner commit for head-split check
* hex-fa: remove unused local head_split var
* hex-fa: tighten up can_split checks
* hex-mm: update unfused paths to use act instead src1
* hex-mm: make sure to check all dsts for splitting
* hexagon: fix the second weight chunk address in the batched HMX matmul prologue
* hexagon: F16 activation and ragged N in the HMX matmul
* hex-mm: tighten the ragged/split checks in mdev cases
* hex-mm: enable MM fusion for F16 activations
* hex-mm: pass tiled sizes to the solver in fused paths
* hex-mmid: remove scalar divs from expert mapping loops
* hex-mmid: proper cacheline safety enforcement for mdev splits
* hex-mm: improve solver for mdev split scanarios and tail handling
* hex-mm: remove redundant checks
* hex-mm: fix fused HMX MUL_MAT_NX drops the final partial tile for quantized weights
* hex-mm: better handling of ragged shapes (removes scalar memset of vtcm)
---------
Co-authored-by: ebateni <ebateni@qti.qualcomm.com>
Co-authored-by: Jhen-Jie Hong <iainst0409@gmail.com>
Co-authored-by: Yiwei Shao <yiwei@aizip.ai>
* hex-allreduce: add support for safe scatter mode
* hex-allreduce: pare down excessive comments
* hex-allreduce: re-write to remove register spills
---------
Co-authored-by: Max Krasnyansky <maxk@qti.qualcomm.com>
make-release-desc.sh now emits "Changelog since [vX.Y.Z](<repo>/releases/tag/vX.Y.Z)"
instead of a plain version string, so the release notes link back to the previous release.
The repo URL is derived from the origin remote (SSH or HTTPS); if it cannot be
resolved (local run without origin), the title falls back to plain text.
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* hex-gdn: start putting together HMX support for GDN
* hex-gdn: working hmx but not-pipelined and slow for now
* hex-gdn: re-write vtcm layout handling and prep for pipelining
* hex-gdn: starting to pipeline hmx and dmas
* hex-gdn: add hvx threading for most pipeline stages
* hex-gdb: add detailed trace events
* hex-gdn: vectorize expfs and use aligned hvx reads/writes
* hex-gnd: vectorize the rest of expf
* hex-gdn: optimize tail processing (pad partial chunks)
* hex-gdb: avoid float up/down casts in hot loops
* hex-fa: remove float up/down casts from inner loops
* hex-gdn: do exp() in f16 to improve HVX utilization
* hex-gdn: optimize tiler
* hex-hmx: bump hmx-queue to 128 and dispatch all GDN gemms at once
* hex-gdn: further pipeline improvements
* hex-gdn: optimize gdn prep stage
* hex-gdn: yet more tweaks to optimize GND_SOLVE task and pipeline
* hex-gdn: improve accuracy and optmize gdn-prep further
* hex-gdn: fix rebase conflict
* hex-bufs: revert max_bufsize enforcement, it is enough to just enforce max_vmem
* hex-scripts: improved inspect script to avoid false alarms in reg spill detector
* hex-fa: improve inline softmax with in-reg VKQ32 accum
* hex-fa: minor improvement for dma pipeline in hvx kernel
* hex-fa: reduce ddr reads by 20-30% during token gen
* hex-gdn: proper alignment for hvx vtcm spads