Some SPIR-V compilers (notably mesa) don't handle the current
vulkan Q4_K/Q5_K scale load pattern in mul_mat particularly well.
While reading three `u8`s from the 12-byte scale array should (at
least on some hardware) result in loading the full 12 bytes in a
single LOAD followed by whatever extraction is needed, at least
the ANV Intel driver really can't practically perform this
optimization.
`mesa`'s unsigned upper bound logic doesn't handle tracking bounds
through ternary, resulting in the `(is < 4) ? ... : is - 4` having
an infinite upper bound (as it cannot prove `is - 4` doesn't
underflow). While this could still be rectified if mesa looked at
the array bounds, it currently doesn't and `glslc` currently emits
SPIR-V that doesn't allow for this optimization anyway (though
maybe it will at some point, see
https://github.com/KhronosGroup/glslang/issues/4206).
In mul_mat_vecq we took a different approach to loading the same
fields. We read the first two bytes we needed from `scale` then
took a branch before deciding whether we needed to read a third
byte. In mesa this did, indeed, lead to a top-level branch with
conditional loads. As such these loads ended up not being
coalesced either (at least in the ANV driver) resulting in
additional instructions in our hot loop.
Instead, here, we go ahead and force loading the full 12 bytes and
extract the bits we need from the packed-u32s instead. In mul_mat
there's a few less ternaries and only one extra shift, so even on
drivers that did optimize the previous loads properly the only
material change should be pulling a few extra bytes into registers
(which on most hardware won't cost anything anyway, though
ironically on Intel it theoretically could). In mul_mat_vecq this
requires a bit of extra math and may read bytes from the u32 that
weren't needed, but it seems likely avoiding the branch is a win
on most platforms.
On Intel Xe2/mesa 26.0.4 with the optimizations from
https://gitlab.freedesktop.org/mesa/mesa/-/work_items/15162,
for shader matmul_id_subgroup_q4_k_f32_f16acc_aligned_l:
* Instruction Count: 2753 -> 2688
* SEND Count: 269 -> 261
* Cycle Count: 273976 -> 266138
* Max live registers: 248 -> 246
* Non SSA regs after NIR: 381 -> 382
for shader matmul_id_subgroup_q5_k_f32_f16acc_aligned_l:
* Instruction Count: 2767 -> 2702
* SEND Count: 271 -> 263
* Cycle Count: 274140 -> 268144
* Max live registers: 248 -> 246
* Non SSA regs after NIR: 381 -> 382
for shader mul_mat_vec_id_q4_k_q8_1_f32:
* Instruction Count: 1930 -> 1646
* SEND Count: 116 -> 71
* Cycle Count: 1348306 -> 843350
* Max live registers: 78 -> 84
* Non SSA regs after NIR: 300 -> 135
for shader mul_mat_vec_id_q5_k_q8_1_f32:
* Instruction Count: 2207 -> 1922
* SEND Count: 131 -> 86
* Cycle Count: 1392012 -> 1037836
* Max live registers: 90 -> 90
* Non SSA regs after NIR: 300 -> 135
for shader mul_mat_vec_q4_k_q8_1_f32:
* Instruction Count: 2029 -> 1749
* SEND Count: 111 -> 66
* Cycle Count: 1347278 -> 840118
* Max live registers: 74 -> 80
* Non SSA regs after NIR: 299 -> 134
for shader mul_mat_vec_q5_k_q8_1_f32:
* Instruction Count: 2307 -> 2022
* SEND Count: 126 -> 81
* Cycle Count: 1379820 -> 954042
* Max live registers: 86 -> 86
* Non SSA regs after NIR: 299 -> 134
On one Arc Pro B60, unsloth/Qwen3.5-35B-A3B-GGUF:UD-Q4_K_XL:
* pp512: 907.34 ± 9.28 -> 941.94 ± 10.53 (+4%)
* pp2048: 897.95 ± 1.82 -> 931.55 ± 1.79 (+4%)
* tg128: 49.49 ± 0.02 -> 49.86 ± 0.05 (+ <1%)
On one Arc Pro B60, unsloth/Qwen3.5-27B-GGUF:Q4_K_S:
* pp512: 324.13 ± 10.52 -> 354.33 ± 6.81 (+9%)
* pp2048: 329.80 ± 0.25 -> 357.10 ± 0.06 (+8%)
* tg128: 17.11 ± 0.01 -> 18.11 ± 0.01 (+6%)
On four Arc Pro B60s, unsloth/Qwen3.5-122B-A10B-GGUF:Q5_K_S with
-sm layer (note that -sm tensor improvements will naturally be
less):
* pp512: 264.55 ± 2.81 -> 280.45 ± 3.94 (+6%)
* pp2048: 319.32 ± 2.72 -> 335.70 ± 3.48 (+5%)
* tg128: 26.39 ± 0.01 -> 26.67 ± 0.01 (+1%)
* vulkan (DRAFT): split shader generation by GLSL source file, to improve incremental build times
* support dep-files so shaders are recompiled if their included files change
* rename shader files which are used as "headers" to use .glsl extension
* move glslc extension detection shaders to separate folders
* the above is to prevent them from getting glob'd with the actual compute shaders that need to be compiled
* vulkan : only write embedded shader .hpp/.cpp when they change
* avoid recompiling ggml-vulkan.cpp when editing shaders
* pass single --source argument instead of --input-dir & --filter to shader gen
* check for source file match earlier
* fix hang in vulkan-shaders-gen when there are compilation errors
* early out did not decrement compile_count
* clean up
* fix glslc integer dot product test
* unconditionally write the embedded shader cpp output
* replace output filepath in generated dep-files to match output in CMakeLists
---------
Co-authored-by: Jeff Bolz <jbolz@nvidia.com>
Jeff Bolz